EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 04hrs 40min 42sec
Learn More →
MIC5205-3.3YM5-TR

MCHPMIC5205-3.3YM5-TR

Microchip Technology
Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT-23-5
Active43,282 in stock

Overview

The MIC5205-3.3YM5-TR is a low-noise, low-dropout (LDO) linear regulator designed for high-performance applications where power density and signal integrity are critical. It delivers a fixed 3.3V output at up to 150mA with an ultra-low-noise output and very low dropout voltage. The device includes an enable pin for power management and robust protection features such as reverse polarity and thermal shutdown.

Why Choose This Part

The MIC5205 offers an excellent balance of high PSRR (75dB at 100Hz) and low noise in a compact SOT-23-5 package. Engineers benefit from integrated safety features including over-current, over-temperature, and reverse polarity protection, which reduce external component count and improve system reliability.

Applications

RF and Wireless Handsets
Provides clean, low-noise power for sensitive RF circuits and cellular transceivers.
Battery-Powered Instrumentation
Utilizes the 150mA output and low quiescent current to extend battery life in portable measurement devices.
Noise-Sensitive Analog Circuitry
Ideal for powering high-resolution ADCs and precision op-amps where 75dB PSRR is beneficial.
Post-Regulator for Switching Supplies
Used to filter ripple from high-frequency DC-DC converters to provide stable rails for digital ICs.

Key Specifications

PSRR 75dB (100Hz)
Output Type Fixed
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Control Features Enable
Current - Output 150mA
Protection Features Over Current, Over Temperature, Reverse Polarity
Number of Regulators 1
Output Configuration Positive
Operating Temperature -40degC ~ 125degC
Voltage - Input (Max) 16V
Voltage Dropout (Max) 0.35V @ 150mA
Current - Supply (Max) 2.5 mA
Supplier Device Package SOT-23-5
Current - Quiescent (Iq) 150 uA
Voltage - Output (Min/Fixed) 3.3V

Getting Started

To implement this LDO, place a 1.0uF ceramic or tantalum capacitor on the output for stability and a 470pF bypass capacitor on the noise bypass pin to minimize output noise. Ensure the enable pin is pulled high to activate the device or controlled by a GPIO for power sequencing. Thermal considerations are important; verify that the SOT-23 package can dissipate the heat generated by the voltage drop at 150mA.

Also Consider

LP2985-33DBVR TITexas Instruments - A widely used 150mA LDO alternative with similar low-noise characteristics and SOT-23-5 footprint.
MCP1700T-3302E/TT MCHPMicrochip Technology - Features much lower quiescent current (1.6uA typical) for ultra-low power applications, though with lower maximum input voltage.
AP2127N-3.3TRG1 DIODiodes Incorporated - Offers a higher 300mA output current capability in the same SOT-23-5 package if more headroom is needed.