EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
30days 09hrs 04min 14sec
Learn More →
USB to UART/SPI/I2C Click

USB to UART/SPI/I2C Click

MPN: MIKROE-1433
MikroElektronika
FT2232H Serial to USB Interface mikroBUS™ Click™ Platform Evaluation Expansion Board
Active77 in stock

Overview

The MIKROE-1433 (USB to UART/SPI/I2C Click) is an expansion board featuring the FT2232H dual-channel USB 2.0 Hi-Speed to UART/FIFO IC. It utilizes the mikroBUS standard to provide a bridge between a PC USB port and various serial interfaces including SPI, I2C, UART, JTAG, and SWD. The board includes on-board EEPROM for storing configuration descriptors and supports both 3.3V and 5V logic levels.

Why Choose This Part

The board features the highly versatile FT2232H, which supports dual-channel operation and flexible serial protocols via the MPSSE engine. It operates with a low run current of 8.5mA at 48MHz and supports a wide supply range from 3.3V to 5V. Integration is simplified by the mikroBUS form factor and the availability of royalty-free D2XX drivers for most operating systems.

Applications

High-Speed Data Acquisition
Bridge high-throughput sensor data from SPI or I2C buses directly to a PC at USB 2.0 Hi-Speed rates.
Embedded Debugging
Implement JTAG or SWD programming and debugging interfaces for microcontrollers using the Multi-Protocol Synchronous Serial Engine (MPSSE).
Legacy Serial Replacement
Convert existing UART-based industrial designs to modern USB connectivity without rewriting high-level application software.

Key Specifications

Type Interface
Contents Board(s)
Function Serial to USB
Platform mikroBUS Click
Utilized IC / Part FT2232H

Getting Started

Connect the Click board to a mikroBUS socket on a development baseboard or use a USB-to-mikroBUS adapter to connect directly to a PC. Download the FTDI D2XX or VCP drivers to enable communication through standard terminal software or custom applications. Use the FT_Prog utility to configure the onboard EEPROM for specific VID/PID or interface modes.

Also Consider

USB to SPI Click MikroElektronika - Specifically optimized for USB-to-SPI bridging using the MCP2210 controller.