EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
22days 14hrs 08min 59sec
Learn More →
MIKROE-3375 GPS/GNSS Active External Antenna

MIKROE-3375 GPS/GNSS Active External Antenna

MPN: MIKROE-3375
MikroElektronika
RF ANTENNA GPS, GNSS Ceramic Patch U.FL (UMCC), I-PEX MHF1 Adhesive
Active9 in stock

Overview

The MIKROE-3375 is a compact, high-performance ceramic patch antenna designed for GPS and GNSS applications centered at 1.575GHz. It features an integrated Low Noise Amplifier (LNA) to enhance signal sensitivity and comes with a 100mm cable terminated in a U.FL (I-PEX MHF1) connector. This active antenna is suitable for embedded integration thanks to its 18x18mm footprint and adhesive mounting backing.

Why Choose This Part

The antenna provides a 4dBi gain and a low VSWR of 1.5, ensuring efficient signal transfer for navigation tasks. Its active LNA operates across a wide 2.5V to 5.5V supply range, making it compatible with most standard 3.3V and 5V microcontroller systems. The compact 18mm square patch design with pre-applied adhesive simplifies mechanical installation in tight enclosures.

Applications

Embedded Positioning Systems
Integration into compact industrial or consumer trackers requiring high-gain GNSS reception via a standard U.FL connection.
Asset Tracking
Used in battery-powered tracking devices where the integrated LNA helps maintain lock in difficult signal environments.
UAV and Robotics
Provides reliable 1.575GHz frequency reception for flight controllers and robotic navigation modules.

Key Specifications

Gain 4dBi
VSWR 1.5
Features Cable - 100mm, LNA
Termination U.FL (UMCC), I-PEX MHF1
Antenna Type Ceramic Patch
Applications GPS, GNSS
Height (Max) 0.244" (6.20mm)
Mounting Type Adhesive
Frequency Group UHF (1GHz ~ 2GHz)
Frequency Range 1.574GHz ~ 1.576GHz
Number of Bands 1
RF Family/Standard Navigation
Frequency (Center/Band) 1.575GHz

Getting Started

Connect the U.FL connector to your GNSS module's antenna port, ensuring the module provides the required DC bias (2.5V to 5.5V) on the RF line to power the internal LNA. Position the ceramic patch with a clear view of the sky and away from high-frequency EMI sources. No software configuration is required for the antenna itself beyond enabling the active antenna power supply in your GNSS receiver's firmware.

Also Consider

1513156-1 TE Connectivity - A passive GPS patch antenna for designs that already include an external LNA on the PCB.
FXP611 Cloud GPS Flex Taoglas - A flexible PCB antenna alternative for ultra-thin enclosures where a ceramic patch is too thick.
GNSS L1/L2 Magnetic Mount Antenna MikroElektronika - An external magnetic mount solution for applications requiring the antenna to be placed outside a metal enclosure.