EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 04hrs 34min 15sec
Learn More →
MPX2010DP

MPX2010DP

STMicroelectronics
Pressure Sensor 1.45PSI (10kPa) Differential Male - 0.19" (4.93mm) Tube, Dual 0 mV ~ 25 mV (10V) 4-SIP Module
Active6,253 in stock

Overview

The MPX2010DP is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output directly proportional to the applied differential pressure. This 10 kPa (1.45 psi) sensor includes on-chip temperature compensation and calibration, making it suitable for precision industrial and medical monitoring tasks. It features a dual-port barbed housing designed for easy tube mounting in differential or gauge pressure configurations.

Why Choose This Part

The sensor is temperature compensated from 0 to +85 degrees Celsius and is ratiometric to the supply voltage, simplifying integration with analog-to-digital converters. Its Wheatstone bridge configuration delivers a linear output with a high accuracy rating of +/-1% for precise low-pressure measurements.

Applications

Respiratory Diagnostics
Measuring low-pressure air flow and differential pressure in medical ventilators and spirometers.
Air Movement Control
Monitoring HVAC filter status and duct pressure to optimize fan speed and air quality.
Industrial Pressure Switching
Providing feedback for liquid level sensing in tanks or pneumatic control systems.
Environmental Monitoring
Used in weather stations or cleanroom monitoring where small pressure differentials must be detected.

Key Specifications

Output 0 mV ~ 25 mV (10V)
Accuracy +/-1%
Features Temperature Compensated
Port Size Male - 0.19" (4.93mm) Tube, Dual
Port Style Barbed
Output Type Wheatstone Bridge
Applications Board Mount
Mounting Type Through Hole
Pressure Type Differential
Package / Case 4-SIP Module
Maximum Pressure 10.88PSI (75kPa)
Voltage - Supply 10V ~ 16V
Termination Style PC Pin
Operating Pressure 1.45PSI (10kPa)
Operating Temperature -40degC ~ 125degC

Getting Started

To interface the MPX2010DP with a microcontroller, use an instrumentation amplifier (such as an INA126 or AD623) to boost the 0-25mV differential signal to a 0-5V range suitable for an ADC. Connect the dual barbed ports to 0.19-inch (4.93mm) ID tubing, ensuring the pressure source does not exceed the maximum supply voltage of 16V during operation.

MPX2010 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Port Size Pressure Type Stock
MPX2010DP (this part) Male - 0.19" (4.93.. Differential 6,253
MPX2010GP Male - 0.19" (4.93.. Vented Gauge —