EmbeddedRelated.com
    Parts   Test & Debug Tools  Oscilloscopes    MSO2204-S
MSO2204-S

MSO2204-S

Uni-Trend Technology US Inc
200 MHz Bench Oscilloscopes USB Interface TFT - Color (Touch) Display 4 Analog Channel 400V Record, Playback, Save
Active18 in stock
Datasheet Digi-Key Compare Prices

Overview

The MSO2204-S is a 200 MHz, 4-channel mixed-signal bench oscilloscope featuring an 8-inch capacitive touch screen and a 56 Mpts deep memory. It integrates high-performance waveform capture using Ultra Phosphor technology with advanced analysis tools like Bode Plot loop testing and a 4M point FFT. This instrument supports a wide range of serial decoding protocols including CAN-FD and FlexRay, making it a versatile tool for complex embedded system debugging.

Why Choose This Part

It offers a high 1.8 ns typical rise time and a large 800x480 capacitive touch interface for intuitive navigation of complex waveforms. The inclusion of multi-channel DVM and AWG features reduces the need for additional bench equipment while supporting SCPI commands for automated test environments.

Applications

Power Supply Stability Analysis
Utilize the built-in Bode Plot loop test functionality to characterize power supply frequency response and phase margin.
Automotive Bus Debugging
Decode and trigger on advanced vehicle networks including CAN-FD, LIN, and FlexRay using the four analog input channels.
Embedded System Protocol Analysis
Monitor and troubleshoot common digital interfaces such as I2C, SPI, and RS232 with deep record and playback capabilities.
High-Resolution Spectral Analysis
Perform detailed frequency domain measurements with 4M point enhanced FFT and independent hardware frequency counters.

Key Specifications

Type Bench
Channels 4 Analog
Function Record, Playback, Save
Bandwidth 200 MHz
Interface USB
Display Type TFT - Color (Touch)
Input Impedance 1M - 16pF
Rise Time (Typ) 1.8 ns
Voltage - Supply 100 ~ 240VAC
Voltage - Input (Max) 400V

Getting Started

Connect the oscilloscope to a local network via the LAN port for web-based access and control or use the USB Device port for SCPI programmable instrument control. For initial hardware setup, ensure the 100 to 240VAC supply is connected and utilize the integrated 16-channel logic analyzer interface for mixed-signal debugging.

Also Consider

STM32H735G Discovery Kit STMicroelectronics - An advanced development platform for testing high-speed digital signals and CAN-FD interfaces before bench validation.

Categories

Test & Debug Tools > Oscilloscopes