EmbeddedRelated.com
The 2026 Embedded Online Conference
    Parts   Memory & Storage  NOR Flash    MT25QL02GCBB8E12-0SIT
MT25QL02GCBB8E12-0SIT

MT25QL02GCBB8E12-0SIT

Micron Technology Inc.
FLASH - NOR Memory IC 2Gbit SPI - Quad I/O 133 MHz 24-T-PBGA (6x8)
Active
Datasheet Digi-Key Mouser Compare Prices

Overview

The MT25QL02GCBB8E12-0SIT is a high-density 2Gbit Serial NOR Flash memory device utilizing a stacked architecture of four 512Mb dies. It supports high-performance SPI interfaces, including Quad I/O and Double Transfer Rate (DTR) modes, reaching clock frequencies up to 133 MHz for rapid data access. Operating between 2.7V and 3.6V, this non-volatile memory is designed for applications requiring large-scale storage and Execute-in-Place (XIP) functionality.

Why Choose This Part

This device offers a massive 2Gbit capacity in a compact 24-T-PBGA footprint, significantly saving PCB real estate compared to parallel NOR Flash. It features advanced security including CRC for data integrity, 64-byte OTP area, and password protection, while providing flexible erase granularities (4KB, 32KB, and 64KB) to optimize file system management.

Applications

Embedded Boot Code Storage
Storing large operating system kernels or bootloaders for high-performance SoCs and FPGAs.
Execute-in-Place (XIP)
Running code directly from Flash memory to reduce the need for high-density system RAM.
High-Resolution Asset Storage
Storing graphical user interface assets, fonts, and look-up tables in industrial displays.
Data Logging
Recording high-volume sensor data in industrial or networking equipment requiring non-volatile reliability.

Key Specifications

Technology FLASH - NOR
Memory Size 2Gbit
Memory Type Non-Volatile
Memory Format FLASH
Mounting Type Surface Mount
Package / Case 24-TBGA
Clock Frequency 133 MHz
Memory Interface SPI - Quad I/O
Voltage - Supply 2.7V ~ 3.6V
Memory Organization 256M x 8
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 24-T-PBGA (6x8)
Write Cycle Time - Word, Page 8ms, 2.8ms

Getting Started

Integrate this memory into your design by ensuring your MCU or FPGA SPI controller supports 4-byte addressing mode required for capacities above 128Mb. Use the standard JEDEC ID (BA22h) for driver identification and refer to Micron's software drivers for implementing the PROGRAM/ERASE SUSPEND operations. Hardware designers should pay close attention to the 24-ball BGA layout and provide adequate decoupling for the 55 mA peak read current.

Also Consider

MT25QL512ABB8E12-0SIT Micron Technology Inc. - A lower-capacity 512Mbit version from the same family for designs that do not require the full 2Gbit stacked die density.

Categories

Memory & Storage > NOR Flash
The 2026 Embedded Online Conference