EmbeddedRelated.com
    Parts   Memory & Storage  NOR Flash    MT25QL128ABA1ESE-0SIT
MT25QL128ABA1ESE-0SIT

MT25QL128ABA1ESE-0SIT

Micron Technology Inc.
FLASH - NOR Memory IC 128Mbit SPI - Quad I/O 133 MHz 8-SO
Active
Datasheet Digi-Key Mouser Compare Prices

Overview

The MT25QL128ABA1ESE-0SIT is a 128Mbit high-performance NOR Flash memory utilizing a Quad I/O SPI interface capable of clock frequencies up to 133 MHz. It operates within a voltage range of 2.7V to 3.6V and is designed for high-reliability applications requiring fast data throughput and non-volatile storage.

Why Choose This Part

This device features a high-speed 133 MHz clock rate for rapid data access and supports advanced security features including password protection and hardware write protection. Its versatile erase granularity (4KB, 32KB, and 64KB) allows for optimized memory management, while a dedicated 64-byte OTP area provides space for unique device identifiers.

Applications

Execute-in-Place (XIP) Bootloading
Utilizing the high-speed 133 MHz Quad SPI interface to boot microcontrollers directly from external flash with minimal latency.
FPGA Configuration Storage
Storing bitstreams for FPGAs that require fast load times during power-on cycles.
Industrial Data Logging
Reliable storage for sensor logs and system events using the 64KB sector and 4KB/32KB subsector erase granularity for efficient data management.
Firmware-over-the-Air (FOTA) Updates
Managing dual-bank firmware images with program/erase suspend capabilities to maintain system responsiveness during updates.

Key Specifications

Technology FLASH - NOR
Memory Size 128Mbit
Memory Type Non-Volatile
Memory Format FLASH
Mounting Type Surface Mount
Package / Case 8-SOIC (0.209", 5.30mm Width)
Clock Frequency 133 MHz
Memory Interface SPI - Quad I/O
Voltage - Supply 2.7V ~ 3.6V
Memory Organization 16M x 8
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 8-SO
Write Cycle Time - Word, Page 8ms, 2.8ms

Getting Started

To interface with this memory, configure your MCU SPI peripheral for Mode 0 or Mode 3 and ensure the VDD is within the 2.7V to 3.6V range. Developers can use standard JEDEC-compliant drivers to read the 3-byte signature (BA18h) for device identification before implementing Quad I/O communication for maximum throughput.

Also Consider

W25Q128JVSIM Winbond Electronics - A widely used 128Mb Quad SPI alternative with similar performance specifications and 8-SOIC footprint compatibility.
S25FL128SAGNFI011 IFXInfineon Technologies - Offers robust performance with high endurance and is often used in industrial applications requiring high-speed SPI NOR.
MX25L12833FM2I-10G Macronix - Provides a cost-effective 128Mb solution with multi-I/O support suitable for high-volume consumer and industrial designs.

Categories

Memory & Storage > NOR Flash