NTS0104BQ
Overview
The NTS0104BQ is a 4-bit, dual-supply translating transceiver featuring auto-direction sensing that enables bidirectional voltage level translation. It supports data rates up to 50 Mbps while bridging logic levels between a 1.65 V to 3.6 V supply on the A port and a 2.3 V to 5.5 V supply on the B port. This device is particularly useful for interfacing low-voltage microcontrollers with higher-voltage peripherals without the need for a direction-control signal.
Why Choose This Part
The NTS0104BQ eliminates the need for a dedicated direction-control pin, simplifying PCB routing and reducing MCU pin count requirements. It features lOFF circuitry for partial power-down mode, which isolates the bus when the device is powered down to prevent damaging backflow current. Additionally, it integrates pull-up resistors, making it directly compatible with both push-pull and open-drain system architectures.
Applications
Key Specifications
Getting Started
To implement the NTS0104BQ, ensure VCCA is always less than or equal to VCCB and provide local decoupling capacitors for both supply pins. Connect the Output Enable (OE) pin to VCCA through a pull-down resistor to keep the outputs in a high-impedance state during power-up. No software configuration is required as the device automatically detects data direction based on the driven signal.
