EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 13hrs 37min 15sec
Learn More →
OKI-T/3-W40P-C

OKI-T/3-W40P-C

Murata Power Solutions Inc.
Non-Isolated PoL Module DC DC Converter 1 Output 0.75 ~ 5.5V 3A 16V - 40V Input
Active3,606 in stock

Overview

The OKI-T/3-W40P-C is a non-isolated point-of-load (PoL) DC-DC converter module designed for high-voltage input applications ranging from 16V to 40V. This 3A surface-mount module provides a programmable output from 0.75V to 5.5V, offering an efficient solution for converting industrial 24V rails down to low-voltage logic levels.

Why Choose This Part

This module features an 88% efficiency rating and excellent thermal derating performance, reducing the need for active cooling. It is designed to drive large 1000 uF ceramic capacitive loads and includes integrated protection against over-temperature, over-current, and short circuits within a standard DOSA SMT package.

Applications

Industrial 24V Power Rails
Step down standard 24V industrial supply voltages to 3.3V or 5V for local logic circuits and sensors.
Distributed Power Architectures
Provide localized high-current power for CPUs, FPGAs, and ASICs in networking and telecommunications equipment.
Point of Sale (POS) Terminals
Compact voltage regulation for peripheral controllers and thermal printers within retail hardware.
Transducer Power Supplies
Clean, regulated power for industrial transducers requiring stable low-voltage inputs from higher-voltage distribution lines.

Key Specifications

Type Non-Isolated PoL Module
Features Remote On/Off, OCP, OTP, SCP, UVLO
Efficiency 88%
Applications ITE (Commercial)
Mounting Type Surface Mount
Package / Case 5-SMD Module
Control Features Enable, Active High
Size / Dimension 0.82" L x 0.47" W x 0.34" H (20.8mm x 11.9mm x 8.5mm)
Number of Outputs 1
Voltage - Output 1 0.75 ~ 5.5V
Operating Temperature -40degC ~ 85degC
Voltage - Input (Max) 40V
Voltage - Input (Min) 16V
Current - Output (Max) 3A

Getting Started

To implement this converter, use an external resistor to set the desired output voltage via the Trim pin. Ensure adequate input decoupling with low-ESR capacitors and utilize the Remote On/Off pin for system-level power sequencing. Designers should refer to the datasheet's thermal derating curves to determine the maximum output current based on the ambient operating temperature and airflow.

Also Consider

LM2596S-ADJ TITexas Instruments - A widely available discrete switching regulator IC for similar 3A adjustable voltage applications up to 40V input.
PTH08T240W TITexas Instruments - A high-performance PoL module featuring TurboTrans technology for optimized transient response.