EmbeddedRelated.com
    Parts    OKL-T/6-W12N-C
OKL-T/6-W12N-C

OKL-T/6-W12N-C

Murata Power Solutions Inc.
Non-Isolated PoL Module DC DC Converter 1 Output 0.591 ~ 5.5V 6A 4.5V - 14V Input
Active2,850 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The OKL-T/6-W12N-C is a non-isolated point-of-load (PoL) DC-DC converter module designed for surface mount applications requiring up to 6A of output current. It features a wide input range of 4.5V to 14V and an adjustable output voltage from 0.591V to 5.5V, achieving high efficiency up to 93%. The module is built on an inspectable Land Grid Array (iLGA) package, making it suitable for compact, high-reliability industrial and commercial electronics.

Why Choose This Part

The iLGA package allows for easy visual inspection of solder joints, enhancing manufacturability compared to standard LGA modules. It incorporates comprehensive protection features including over-current, over-temperature, and short-circuit protection, alongside a Power Good signal for system monitoring. The wide 4.5V to 14V input range provides flexibility to operate from standard 5V or 12V rails.

Applications

Distributed Power Architectures
Ideal for providing localized voltage regulation from a 12V intermediate bus to high-current digital loads.
FPGA and DSP Core Power
Delivers the precise, low-voltage, high-current power required by modern high-performance processors.
Network and Telecom Equipment
Supports high-density line cards and networking gear where thermal management and small footprint are critical.
Server and Storage Systems
Provides efficient power conversion for memory modules and I/O controllers in commercial computing environments.

Key Specifications

Type Non-Isolated PoL Module
Features Remote On/Off, OCP, OTP, SCP, UVLO
Efficiency 93%
Applications ITE (Commercial)
Mounting Type Surface Mount
Power (Watts) 30 W
Package / Case 12-BLGA Module
Control Features Enable, Active Low
Size / Dimension 0.48" L x 0.48" W x 0.28" H (12.2mm x 12.2mm x 7.1mm)
Number of Outputs 1
Voltage - Output 1 0.591 ~ 5.5V
Voltage - Input (Max) 14V
Voltage - Input (Min) 4.5V
Current - Output (Max) 6A

Getting Started

To implement this module, select a sense resistor to set the desired output voltage and ensure adequate input and output capacitance as specified in the datasheet. Designers should pay close attention to the PCB thermal pad layout to handle the 30W maximum power throughput. The Active Low Enable pin allows for easy sequencing using external logic or a supervisor IC.

Also Consider

OKL-T/6-W12P-C Murata Power Solutions Inc. - This is the active-high logic version of the same 6A PoL regulator for systems requiring positive enable logic.
PTH08T240W TITexas Instruments - A comparable 10A non-isolated module that offers higher current capability in a different form factor.