EmbeddedRelated.com
    Parts    OKL-T/6-W12P-C
OKL-T/6-W12P-C

OKL-T/6-W12P-C

Murata Power Solutions Inc.
Non-Isolated PoL Module DC DC Converter 1 Output 0.591 ~ 5.5V 6A 4.5V - 14V Input
Active8,892 in stock
Datasheet Digi-Key Compare Prices

Overview

The OKL-T/6-W12P-C is a non-isolated Point-of-Load (PoL) DC-DC converter module designed for high-efficiency power delivery in compact systems. It provides a regulated output current up to 6A from an input voltage range of 4.5V to 14V, with an adjustable output voltage from 0.591V to 5.5V. This module utilizes the inspectable Land Grid Array (iLGA) package, which facilitates visual inspection of solder joints in surface-mount production environments.

Why Choose This Part

The module offers high efficiency up to 93% and a small 12.2mm x 12.2mm footprint to save PCB real estate. It includes comprehensive protection features such as over-current, over-temperature, and short-circuit protection, alongside a Power Good signal for system health monitoring. The iLGA package specifically addresses the reliability concerns of traditional LGA packages by allowing for easier inspection.

Applications

Microprocessor and FPGA Core Power
Providing high-current, low-voltage rails for digital logic requiring precise regulation and fast transient response.
Distributed Power Architectures
Used as a localized step-down stage from a 12V intermediate bus to power peripheral components.
Information Technology Equipment
Reliable power conversion for commercial servers, networking hardware, and telecommunications equipment.

Key Specifications

Type Non-Isolated PoL Module
Features Remote On/Off, OCP, OTP, SCP, UVLO
Efficiency 93%
Applications ITE (Commercial)
Mounting Type Surface Mount
Power (Watts) 30 W
Package / Case 12-BLGA Module
Control Features Enable, Active High
Size / Dimension 0.48" L x 0.48" W x 0.28" H (12.2mm x 12.2mm x 7.1mm)
Number of Outputs 1
Voltage - Output 1 0.591 ~ 5.5V
Voltage - Input (Max) 14V
Voltage - Input (Min) 4.5V
Current - Output (Max) 6A

Getting Started

To use this module, calculate the required trim resistor value to set the output voltage between 0.591V and 5.5V as per the datasheet formula. Ensure the Enable pin is pulled high for the 'P' suffix (Positive Logic) model to start the converter. Layout should follow recommended copper pour patterns for the iLGA pads to ensure proper thermal management and electrical connectivity.

Also Consider

OKL-T/6-W12N-C Murata Power Solutions Inc. - This is the negative logic version of the same module, where the enable pin must be pulled low to turn the converter on.
PTH08T240W TITexas Instruments - A similar 10A non-isolated PoL module for applications requiring slightly higher current capacity.