PP009-1
Teledyne LeCroy
10:1 Passive 500MHz 51.181" (1300.00mm) Black Oscilloscope Probe Test Lead 10M Input Resistance CAT I 400V, CAT II 300V
Active7 in stock
Overview
The PP009-1 is a high-performance 500MHz passive oscilloscope probe designed for use with Teledyne LeCroy oscilloscopes. It features a 10:1 attenuation ratio and a high 10M ohm input resistance to minimize circuit loading during high-frequency measurements. This probe is rated for CAT I 400V and CAT II 300V environments, providing a balance of safety and signal integrity for wide-bandwidth debugging.
Why Choose This Part
This probe offers a low input capacitance of 9.5pF, which reduces the impact on the rise time of the measured signal. Its 1.3-meter cable length provides ample reach on the test bench while maintaining a flat frequency response across the 500MHz bandwidth.
Applications
High-Speed Digital Debugging
Characterizing signal integrity on digital buses with clock speeds up to several hundred megahertz.
Power Supply Characterization
Measuring switching transients and ripple in high-frequency DC-DC converters where low capacitance is required.
Analog Signal Analysis
Verifying high-bandwidth amplifier stages and filter responses without significantly loading the circuit under test.
Key Specifications
Type
Passive
Color
Black
Bandwidth
500MHz
Cable Length
51.181" (1300.00mm)
Voltage - Max
CAT I 400V, CAT II 300V
Attenuation Value
10:1
Resistance - Input
10M
Capacitance - Input
9.5pF
Also Consider
P6139B
Tektronix
- A 500MHz passive probe standard for Tektronix instrumentation with similar input capacitance specifications.
