EmbeddedRelated.com
    Parts    PRV15-D1-6
PRV15-D1-6

PRV15-D1-6

SDS HIGH VOLTAGE
High Voltage - Isolated Module DC DC Converter 2 Output 0 ~ -500V 6mA 2.5V - 15V Input
Active3 in stock
Datasheet Digi-Key Compare Prices

Overview

The PRV15-D1-6 is a 6W isolated high-voltage DC/DC converter module designed to provide a dual output of up to 1000V (configured as 2x 0.5kV or 2x 1kV) from a wide 2.5V to 15V input range. It features a proportional output architecture with built-in metal shielding and a quasi-sinewave oscillator to minimize EMI in sensitive measurement environments.

Why Choose This Part

The module utilizes a quasi-sinewave oscillator and metal shielding to achieve significantly lower noise compared to standard switching regulators. It includes robust protection features such as thermal shutdown, over-voltage protection, and a logical alarm output to indicate fault conditions to a host controller.

Applications

Photomultiplier Tube (PMT) Biasing
Low-noise high voltage supply for sensitive light detection sensors in analytical instruments.
Electrostatic Chucks
Providing the necessary high potential for wafer handling and semiconductor processing equipment.
Mass Spectrometry
Precise voltage generation for ion acceleration and deflection plates.
Insulation Testing
Integrated high-voltage source for portable handheld and industrial insulation resistance meters.

Key Specifications

Type High Voltage - Isolated Module
Features Proportional Output, Remote On/Off
Efficiency 70 ~ 78%
Applications Industrial, ITE (Commercial)
Mounting Type Through Hole, Horizontal
Power (Watts) 6 W
Approval Agency CE
Control Features Enable, Active Low
Size / Dimension 1.83" L x 1.14" W x 0.49" H (46.5mm x 28.0mm x 12.5mm)
Number of Outputs 2
Voltage - Output 1 0 ~ -500V
Voltage - Isolation 500 V
Operating Temperature -10degC ~ 70degC (With Derating)
Voltage - Input (Max) 15V
Voltage - Input (Min) 2.5V
Current - Output (Max) 6mA

Getting Started

Connect a stable DC source between 2.5V and 15V to the input pins and use the Active Low Enable pin to control the output state. Ensure the logical alarm pin is monitored by a microcontroller to handle thermal or over-voltage events, and provide adequate PCB creepage distances around the high-voltage output pins.