EmbeddedRelated.com
    Parts   Microcontrollers    PVG612S-TPBF
PVG612S-TPBF

IFXPVG612S-TPBF

Infineon Technologies
Solid State Photo-Coupled Relay (Photorelay) SPST-NO (1 Form A) 6-SMD (0.300", 7.62mm)
Active102 in stock
Datasheet Digi-Key Compare Prices

Overview

The PVG612S-TPBF is a single-pole, normally open photovoltaic relay capable of switching both AC and DC loads up to 60V. It utilizes a power MOSFET output stage driven by a photovoltaic generator, providing 4000V of I/O isolation in a surface-mount package. This solid-state relay is designed to replace electromechanical relays in applications requiring high reliability and high load current capacity up to 2.0A in specific DC configurations.

Why Choose This Part

This relay offers bounce-free operation and high ESD tolerance of up to 4000V (HBM), ensuring long-term reliability in harsh environments. Its linear AC/DC operation allows for versatile switching of bipolar signals, while the 4000V I/O isolation protects sensitive low-voltage control circuitry from high-voltage load transients.

Applications

Programmable Logic Controllers (PLC)
Used for switching industrial actuators and sensors where bounce-free operation is critical for digital logic integrity.
Audio Equipment
Provides silent, clickless signal switching and muting circuits without the mechanical noise of traditional relays.
Power Distribution
Manages power sequencing and distribution in peripheral devices and computers due to its high off-state resistance.
Industrial Automation
Ideal for controlling displays, indicators, and small motor loads where high cycle life and solid-state reliability are required.

Key Specifications

Circuit SPST-NO (1 Form A)
Relay Type Photo-Coupled Relay (Photorelay)
Output Type AC, DC
Load Current 1 A
Mounting Type Surface Mount
Package / Case 6-SMD (0.300", 7.62mm)
Voltage - Load 0 V ~ 60 V
Approval Agency UL
Voltage - Input 1.2VDC
Termination Style Gull Wing
Operating Temperature -40degC ~ 85degC
Supplier Device Package 6-SMT
On-State Resistance (Max) 500 mOhms

Getting Started

To implement this part, ensure the input LED current is limited by a series resistor to meet the 1.2VDC nominal forward voltage requirement. For maximum DC current handling, refer to the datasheet for 'C Connection' wiring configurations which can support up to 2.0A at 40 degrees Celsius. Use standard SMT reflow profiles suitable for 6-pin DIP gull-wing packages.

Categories

Microcontrollers