EmbeddedRelated.com
    Parts    PVX006A0X3-SRZ
PVX006A0X3-SRZ

PVX006A0X3-SRZ

OmniOn Power™
Non-Isolated PoL Module DC DC Converter 1 Output 0.6 ~ 5.5V 6A 3V - 14.4V Input
1,463 in stock
Datasheet Digi-Key Compare Prices

Overview

The PVX006A0X3-SRZ is a 6A non-isolated Point-of-Load (PoL) DC-DC converter module from OmniOn Power that operates over a wide input range of 3V to 14.4V. Part of the Pico TLynx II series, it provides a highly regulated output voltage adjustable from 0.6V to 5.5V via an external resistor. This compact 12.2mm x 12.2mm surface-mount module is designed for high-density power architectures requiring high efficiency and precise voltage regulation.

Why Choose This Part

The module features Tunable Loop technology, which allows users to optimize the dynamic response of the converter to match specific load requirements with minimal external capacitance. It delivers high efficiency up to 94% and includes integrated protection features such as remote On/Off, over-current, over-temperature, and under-voltage lockout.

Applications

Distributed Power Architectures
Ideal for intermediate bus architectures in networking and computing equipment where local voltage regulation is required for high-performance ICs.
Enterprise Computing
Providing stable power rails for servers, storage systems, and high-end workstations.
Industrial Equipment
Powering FPGAs, ASICs, and microprocessors in industrial automation and control systems.
Telecommunications
Used in base stations and switching equipment to provide efficient power conversion for communication processors.

Key Specifications

Type Non-Isolated PoL Module
Features Remote On/Off, OCP, OTP, UVLO
Efficiency 94%
Applications ITE (Commercial)
Mounting Type Surface Mount
Power (Watts) 33 W
Package / Case 17-SMD Module
Control Features Enable, Active Low
Size / Dimension 0.48" L x 0.48" W x 0.29" H (12.2mm x 12.2mm x 7.3mm)
Number of Outputs 1
Voltage - Output 1 0.6 ~ 5.5V
Operating Temperature -40degC ~ 85degC
Voltage - Input (Max) 14.4V
Voltage - Input (Min) 3V
Current - Output (Max) 6A

Getting Started

To implement this module, select a trim resistor based on the desired output voltage using the formula provided in the datasheet. Ensure adequate input and output capacitance is placed close to the module pins to minimize ripple and noise, and use the Power Good (PGOOD) signal to monitor the regulation status in your system controller.

Also Consider

PTH08T240WAZ TITexas Instruments - Offers a similar 10A output capacity with TurboTrans technology for optimized transient response.
OKL-T/6-W12N-C Murata Power Solutions - A 6A non-isolated PoL with a similar wide input range in a compact land grid array package.