EmbeddedRelated.com
RAA210030GLG#HD0

RENRAA210030GLG#HD0

Renesas Electronics Corporation
Non-Isolated PoL Module DC DC Converter 1 Output 0.6 ~ 5V 3A 2.7V - 5.5V Input
Active6,755 in stock

Overview

The RAA210030GLG#HD0 is a high-efficiency 3A non-isolated Point-of-Load (PoL) DC/DC power module that integrates the controller, MOSFETs, and inductor into a compact 3mm x 3mm package. It operates from an input voltage range of 2.7V to 5.5V and provides an adjustable output from 0.6V up to 5V, reaching efficiencies as high as 95%.

Why Choose This Part

The module simplifies power design by integrating the power inductor, reducing the total bill of materials and EMI concerns. Its 95% peak efficiency and selectable Pulse Frequency Modulation (PFM) mode allow for optimized performance across both light and full load conditions.

Applications

High-Density Computing
Providing local rail regulation for FPGAs, ASICs, and microprocessors where PCB real estate is extremely limited.
Optical Communications
Powering transceiver modules and networking equipment that require low-noise, high-efficiency power conversion in small form factors.
Industrial Control Systems
Reliable 3A point-of-load regulation for PLC modules and sensors operating in temperatures up to 125 degrees Celsius.

Key Specifications

Type Non-Isolated PoL Module
Features Adjustable Output, Remote On/Off
Efficiency 95%
Applications ITE (Commercial)
Mounting Type Surface Mount
Package / Case 10-FDFN Exposed Pad
Size / Dimension 0.12" L x 0.12" W x 0.05" H (3.0mm x 3.0mm x 1.3mm)
Number of Outputs 1
Voltage - Output 1 0.6 ~ 5V
Operating Temperature -40degC ~ 125degC
Voltage - Input (Max) 5.5V
Voltage - Input (Min) 2.7V
Current - Output (Max) 3A
Supplier Device Package 10-DFN (3x3)

Getting Started

For initial evaluation, designers should utilize the manufacturer's evaluation board to test the 1ms internal soft-start and power-good flag functionality. Ensure the 10-FDFN exposed pad is correctly soldered to a large ground plane for optimal thermal dissipation at 3A loads.

Also Consider

LTM4623 Analog Devices - An ultrathin 3A DC/DC uModule regulator suitable for backside PCB mounting in high-density designs.