EmbeddedRelated.com
RFMM-0505S

RFMM-0505S

Recom Power
Isolated Module DC DC Converter 1 Output 5V 200mA - 5V Input
Active6,262 in stock

Overview

The RFMM-0505S is a 1W isolated DC/DC converter designed to provide a regulated 5V output from a 5V input. Housed in a standard SIP7 package, it offers 4kVDC isolation, making it suitable for separating power rails in cost-sensitive commercial applications.

Why Choose This Part

This module features an industry-standard SIP7 footprint and a high 4kVDC isolation rating for enhanced safety and signal integrity. It provides a cost-effective solution with 80% efficiency and includes short-circuit protection for improved system reliability.

Applications

Ground Loop Elimination
Provides galvanic isolation to prevent ground loops in sensitive analog or digital communication circuits.
Digital Interface Power
Ideally suited for powering isolated logic level shifters or RS-485/RS-232 transceivers.
Industrial Instrumentation
Provides isolated 5V rails for sensors and low-power measurement circuits to improve noise immunity.

Key Specifications

Type Isolated Module
Features SCP
Efficiency 80%
Applications ITE (Commercial)
Mounting Type Through Hole
Power (Watts) 1 W
Package / Case 7-SIP Module, 4 Leads
Size / Dimension 0.77" L x 0.28" W x 0.40" H (19.6mm x 7.1mm x 10.2mm)
Number of Outputs 1
Voltage - Output 1 5V
Voltage - Isolation 4 kV
Operating Temperature -40degC ~ 85degC
Voltage - Input (Max) 5V
Current - Output (Max) 200mA

Getting Started

When integrating this module, ensure a minimum load is maintained if specified by the manufacturer to maintain regulation. Place 1uF to 10uF ceramic capacitors at the input and output pins to minimize ripple, and ensure the PCB layout accounts for the 19.6mm length of the SIP7 package.

Also Consider

MEE1S0505SC Murata Power Solutions - A 1W SIP4 alternative for designs where a smaller footprint is required over the larger SIP7 package.