EmbeddedRelated.com
    Parts   Power Management  DC-DC Converters    RI-0505S
RI-0505S

RI-0505S

Recom Power
Isolated Module DC DC Converter 1 Output 5V 400mA 4.5V - 5.5V Input
Active695 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The RI-0505S is an isolated 2W DC/DC converter module designed to provide a regulated 5V output from a nominal 5V input. It features 1kVDC isolation in a compact 4-pin SIP package, making it an efficient solution for breaking ground loops and providing local voltage regulation in noise-sensitive circuits. The module achieves up to 83% efficiency and includes short-circuit protection for improved system reliability.

Why Choose This Part

This converter provides a high power density of 2W in a standard SIP4 footprint, saving significant board space compared to discrete isolated designs. Its 83% efficiency minimizes thermal management requirements, allowing for reliable operation from -40C to +85C.

Applications

Ground Loop Elimination
Ideal for isolating digital circuits from sensitive analog front-ends to prevent noise coupling and ground loops.
Industrial Interface Power
Providing isolated power to RS-485 or CAN bus transceivers to protect control logic from high-voltage transients.
Distributed Power Architectures
Local regulation and isolation for point-of-load applications in systems with 5V primary power rails.

Key Specifications

Type Isolated Module
Features SCP
Efficiency 83%
Applications ITE (Commercial)
Mounting Type Through Hole
Power (Watts) 2 W
Package / Case 4-SIP Module
Size / Dimension 0.45" L x 0.30" W x 0.40" H (11.5mm x 7.6mm x 10.2mm)
Number of Outputs 1
Voltage - Output 1 5V
Voltage - Isolation 1 kV
Operating Temperature -40degC ~ 85degC
Voltage - Input (Max) 5.5V
Voltage - Input (Min) 4.5V
Current - Output (Max) 400mA

Getting Started

To integrate this module, place a 4.7uF to 10uF low-ESR ceramic capacitor on the input and output rails to minimize ripple and noise. Ensure that the 4-pin SIP footprint follows the 2.54mm pitch standard for easy through-hole mounting. Since it is a self-contained module, no external inductors or feedback loops are required for standard operation.

Also Consider

RO-0505S RECOM Power - A 1W version in the same SIP4 package for applications with lower power requirements.
MEE1S0505SC Murata Power Solutions - A 1W alternative with similar 1kVDC isolation and footprint for cost-sensitive designs.

Categories

Power Management > DC-DC Converters