EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 15hrs 06min 27sec
Learn More →
RN4871-I/RM140

MCHPRN4871-I/RM140

Microchip Technology
Bluetooth Bluetooth v5.0 Transceiver Module 2.402GHz ~ 2.48GHz Integrated, Chip Surface Mount
Active16,131 in stock

Overview

The RN4871-I/RM140 is a compact Bluetooth Low Energy (BLE) 5.0 module featuring an integrated chip antenna and a complete on-board BLE stack. It uses a simple ASCII command interface over UART, making it an ideal choice for adding wireless connectivity to small embedded systems without requiring a complex software stack on the host microcontroller.

Why Choose This Part

The module simplifies development with a built-in scripting engine for hostless operation and a pre-certified Bluetooth 5.0 stack. Its small 16-SMD form factor and low 1.9V to 3.6V supply range allow for high density and flexible power configurations in space-constrained designs.

Applications

Serial Cable Replacement
Uses the UART Transparent Service to replace physical RS-232 or TTL serial links with a wireless BLE connection.
IoT Sensor Nodes
Ideal for battery-powered sensors using its 2.9uA shutdown mode and integrated GATT profiles for data reporting.
Medical Wearables
Small 9mm x 11.5mm footprint and low-power operation make it suitable for portable health monitoring devices.
Beacon Devices
Utilizes the Beacon Private Service to implement proximity-based services and indoor positioning.

Key Specifications

Protocol Bluetooth v5.0
Data Rate 10kbps
Frequency 2.402GHz ~ 2.48GHz
Modulation GFSK
Sensitivity -90dBm
Antenna Type Integrated, Chip
Mounting Type Surface Mount
Package / Case 16-SMD Module
Power - Output 0dBm
Voltage - Supply 1.9V ~ 3.6V
Serial Interfaces I2C, AIO, PIO, PWM, SPI, UART
RF Family/Standard Bluetooth
Utilized IC / Part RN4871
Current - Receiving 13mA
Operating Temperature -40degC ~ 85degC
Current - Transmitting 13mA

Getting Started

Developers can begin by interfacing the module via UART using any standard terminal emulator to send ASCII commands. For hardware evaluation, use the RN-4871-SNSR development board which provides access to all pins and integrated sensors.

Also Consider

BM71 MCHPMicrochip Technology - Another small-form-factor BLE module option from Microchip with a different pinout and hardware interface style.