Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days
02hrs
27min
56sec
Learn More →
Parts
RV-4162-C7-32.768KHZ-20PPM-TA-QC
Overview
The RV-4162-C7 is an ultra-low power Real-Time Clock (RTC) module with an integrated 32.768 kHz crystal, designed for high-reliability applications. It operates over a wide voltage range from 1.0V to 4.4V while consuming as little as 0.27uA in standby mode. The device features an I2C interface and includes advanced functions like a watchdog timer, programmable alarms, and oscillator fail detection.
Why Choose This Part
The integrated crystal eliminates the need for external tuning capacitors and simplifies PCB layout while ensuring a factory-calibrated accuracy of +/- 20 ppm. Its extremely low 1.0V minimum operating voltage allows for direct operation from partially discharged coin cells or supercapacitors.
Applications
Battery-Powered IoT Nodes
Extends battery life in remote sensors by providing precise timekeeping at 0.5uA max current consumption.
Automotive Systems
Utilizes AEC-Q200 qualification for dashboard clocks, telematics, and E-call systems.
Industrial Data Loggers
Maintains accurate timestamps for sensor data even during primary power failure using a backup capacitor.
Meter Reading
Provides tamper detection and scheduled wake-up intervals for smart utility meters.
Key Specifications
Type
Clock/Calendar
Features
Alarm, Leap Year, Programmable Clock Output, Watchdog Timer
Interface
I2C, 2-Wire Serial
Date Format
YY-MM-DD-dd
Time Format
HH:MM:SS:hh (24 hr)
Mounting Type
Surface Mount
Package / Case
8-WCDFN
Voltage - Supply
1V ~ 4.4V
Operating Temperature
-40degC ~ 85degC (TA)
Supplier Device Package
8-SON (3.2x1.5)
Current - Timekeeping (Max)
0.5uA @ 3V
Getting Started
Connect the RTC to an I2C bus with pull-up resistors on the SCL and SDA lines. Use the frequency-offset trimming register to fine-tune accuracy for specific temperature environments and monitor the interrupt pin for alarm or watchdog events.
Also Consider
DS1307
Maxim Integrated
- A widely used 5V I2C RTC for applications where ultra-low voltage operation is not a priority.
DS3231
Maxim Integrated
- Provides much higher accuracy (+/- 2 ppm) via an integrated temperature-compensated crystal oscillator (TCXO).