EmbeddedRelated.com
S25FL064LABMFA013

IFXS25FL064LABMFA013

Infineon Technologies
FLASH - NOR Memory IC 64Mbit SPI - Quad I/O, QPI 108 MHz 8-SOIC
Active9,747 in stock

Overview

The S25FL064LABMFA013 is a 64Mbit (8MB) non-volatile CMOS Flash memory device utilizing the FL-L family architecture. It supports Standard SPI, Dual I/O, Quad I/O, and QPI interfaces with clock frequencies up to 108 MHz. Operating within a 2.7V to 3.6V range, this NOR Flash memory provides high reliability and fast read performance in a space-efficient 8-SOIC package.

Why Choose This Part

The device features a high-performance 108 MHz clock rate and Quad I/O capability for high data throughput. It offers low power consumption with a deep power down mode of only 2 uA and a standby current of 20 uA. The 8-SOIC package provides a balance between board space savings and ease of manufacturing for surface mount designs.

Applications

Embedded System Boot Code
Storing bootloaders and firmware for microcontrollers that require fast XiP (Execute-in-Place) performance via Quad SPI.
Industrial Automation
Non-volatile storage for configuration parameters, look-up tables, and error logs in industrial PLC and sensor nodes.
Networking Equipment
High-speed storage for routing tables and OS kernels in routers, switches, and gateway devices.

Key Specifications

Technology FLASH - NOR
Memory Size 64Mbit
Memory Type Non-Volatile
Memory Format FLASH
Mounting Type Surface Mount
Package / Case 8-SOIC (0.209", 5.30mm Width)
Clock Frequency 108 MHz
Memory Interface SPI - Quad I/O, QPI
Voltage - Supply 2.7V ~ 3.6V
Memory Organization 8M x 8
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 8-SOIC

Getting Started

Integrate this memory into your design using a standard SPI or QPI controller found on most modern MCUs. Ensure the power supply is stable between 2.7V and 3.6V and utilize the Deep Power Down mode to extend battery life in portable applications. Verification can be performed using standard Flash programming tools or by implementing the JEDEC SFDP discovery protocol in your firmware.

S25FL064L Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Temp Range Stock
S25FL064LABMFA013 (this part) -40degC ~ 85degC (.. 9,747
S25FL064LABMFV013 -40degC ~ 105degC .. 27,242
S25FL064LABMFI013 -40degC ~ 85degC (.. 53,517
S25FL064LABMFI011 -40degC ~ 85degC (.. 1,120
Also available as: S25FL064LABNFI043, S25FL064LABMFA010, S25FL064LABMFM010, S25FL064LABNFA010

Also Consider

W25Q64JVSSIQ Winbond Electronics - A widely used 64Mb alternative with similar SPI/Quad-SPI performance and 8-SOIC footprint.
MX25L6433FM2I-08G Macronix - Offers compatible 64Mb density and multi-I/O functionality with high-speed read capabilities.
MT25QL01GBBB8E12-0SIT Micron Technology - Consider this higher density series if your application firmware requirements grow beyond 64Mbit.