EmbeddedRelated.com
S25FL064LABMFI010

IFXS25FL064LABMFI010

Infineon Technologies
FLASH - NOR Memory IC 64Mbit SPI - Quad I/O, QPI 108 MHz 8-SOIC
Active25,623 in stock

Overview

The S25FL064LABMFI010 is a 64Mbit (8MB) non-volatile NOR Flash memory IC manufactured by Infineon using 65-nm floating gate technology. It supports high-performance SPI, Quad I/O, and QPI interfaces with clock speeds up to 108 MHz for fast data throughput. This device is designed for code storage and data logging in embedded systems requiring high reliability and security features.

Why Choose This Part

This memory offers a high clock frequency of 108 MHz and supports Double Data Rate (DDR) read operations for optimized throughput. It includes robust security features such as four 256-byte security regions and individual block locking. With 100,000 program-erase cycles and 20-year data retention, it provides the long-term reliability required for industrial-grade applications.

Applications

Firmware Storage
Storing boot code and application firmware for microcontrollers and SoCs that lack internal flash or require additional capacity.
Parameter Logging
Recording system configuration, calibration data, and event logs in industrial and consumer electronics.
Execute-in-Place (XiP)
Direct execution of code from the flash memory over high-speed Quad I/O interfaces to minimize RAM requirements.

Key Specifications

Technology FLASH - NOR
Memory Size 64Mbit
Memory Type Non-Volatile
Memory Format FLASH
Mounting Type Surface Mount
Package / Case 8-SOIC (0.209", 5.30mm Width)
Clock Frequency 108 MHz
Memory Interface SPI - Quad I/O, QPI
Voltage - Supply 2.7V ~ 3.6V
Memory Organization 8M x 8
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 8-SOIC

Getting Started

To interface with this device, configure your microcontroller SPI peripheral for Mode 0 or Mode 3 and ensure the VDD is within the 2.7V to 3.6V range. Utilize the 256-byte page programming buffer for efficient write operations and implement the 4 KB sector erase for granular data management. Software drivers can be integrated using standard SPI or QSPI libraries available in most MCU SDKs.

S25FL064L Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Temp Range Stock
S25FL064LABMFI010 (this part) SOIC-8 -40degC ~ 85degC (.. 25,623
S25FL064LABMFV013 SOIC-8 -40degC ~ 105degC .. 27,242
S25FL064LABMFI013 SOIC-8 -40degC ~ 85degC (.. 53,517
S25FL064LABMFA013 SOIC-8 -40degC ~ 85degC (.. 9,747
S25FL064LABMFI011 SOIC-8 -40degC ~ 85degC (.. 1,120
S25FL064LABNFI010 WFDFN-8 -40degC ~ 85degC (.. 1,132
Also available as: S25FL064LABNFI043, S25FL064LABMFA010, S25FL064LABMFM010, S25FL064LABNFA010

Also Consider

W25Q64JVSSIQ Winbond Electronics - A widely used alternative with similar 64Mbit capacity and Quad SPI support in an 8-SOIC package.
MX25L6433FM2I-08G Macronix - Offers 64Mbit density with a high-speed interface suitable for performance-critical code storage.