EmbeddedRelated.com
    Parts    S25FL116K0XNFI013
S25FL116K0XNFI013

S25FL116K0XNFI013

Cypress Semiconductor Corp
FLASH - NOR Memory IC 16Mbit SPI - Quad I/O 108 MHz 8-WSON (5x6)
16,117 in stock
Datasheet Digi-Key Compare Prices

Overview

The S25FL116K0XNFI013 is a 16Mbit (2M x 8) non-volatile CMOS Flash memory device utilizing a Serial Peripheral Interface (SPI). It supports high-performance Dual and Quad I/O modes with clock frequencies up to 108 MHz, providing efficient data throughput for embedded systems. This component is designed to operate within a 2.7V to 3.6V supply range and features low power consumption, including a 2 uA typical deep power-down mode.

Why Choose This Part

This device offers a high-speed clock frequency of 108 MHz and Quad SPI support for rapid data access. It is optimized for low-power applications with a standby current of 15 uA and a deep sleep current of only 2 uA. The industrial temperature rating from -40C to +85C ensures reliability in harsh operating environments.

Applications

Firmware Storage
Storing boot code and application firmware for microcontrollers in industrial and consumer electronics.
Parameter Logging
Saving configuration settings, calibration data, and system logs that must persist through power cycles.
UI Asset Repository
Hosting small graphical assets, fonts, and lookup tables for low-power embedded displays.

Key Specifications

Technology FLASH - NOR
Memory Size 16Mbit
Memory Type Non-Volatile
Memory Format FLASH
Mounting Type Surface Mount
Package / Case 8-WDFN Exposed Pad
Clock Frequency 108 MHz
Memory Interface SPI - Quad I/O
Voltage - Supply 2.7V ~ 3.6V
Memory Organization 2M x 8
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 8-WSON (5x6)
Write Cycle Time - Word, Page 3ms

Getting Started

To interface with this memory, configure your microcontroller's SPI peripheral for Mode 0 or Mode 3 and ensure the 2.7V to 3.6V supply requirements are met. Use standard JEDEC ID commands (9Fh) to verify communication before implementing sector erase or page program routines. Most modern HAL libraries for STM32, AVR, or ESP32 provide drivers compatible with the FL-K family instruction set.

Also Consider

W25Q16JVSSIQ Winbond Electronics - A widely available 16Mbit alternative with similar 133MHz clock speeds and low power characteristics.
AT25SF161B-SSHB-T Adesto Technologies - Features ultra-low power consumption and wide voltage range suitable for battery-operated IoT devices.