EmbeddedRelated.com
    Parts   Memory & Storage  NOR Flash    S25FL128SAGMFBR00
S25FL128SAGMFBR00

IFXS25FL128SAGMFBR00

Infineon Technologies
NOR Flash Nor
795 in stock
Datasheet Mouser Compare Prices

Overview

The S25FL128SAGMFBR00 is a 128Mbit non-volatile NOR Flash memory IC from the FL-S family, designed for high-performance embedded storage. It utilizes a 16M x 8 organization and supports a versatile Serial Peripheral Interface (SPI) with Multi-I/O capabilities including Dual and Quad I/O. Operating on a 2.7V to 3.6V supply, this device is engineered for reliability with integrated hardware Error Correction Code (ECC) and an extended temperature range of -40 to 105 degrees Celsius.

Why Choose This Part

This device offers exceptional throughput with a 133 MHz clock frequency and Quad DDR read modes for high-bandwidth applications. Practical engineering benefits include internal hardware ECC for single-bit error correction and a flexible sector architecture that offers 4-KB hybrid sectors for legacy software compatibility.

Applications

Embedded System Boot Code
Storing critical bootloader and firmware images for fast execution upon power-up via the AutoBoot feature.
High-Resolution Graphics Storage
Providing high-speed data access for small displays and haptic feedback profiles in industrial interfaces.
Industrial Data Logging
Recording system parameters and event logs in harsh environments requiring high reliability and ECC support.

Key Specifications

Technology FLASH - NOR
Memory Size 128Mbit
Memory Type Non-Volatile
Memory Format FLASH
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295", 7.50mm Width)
Clock Frequency 133 MHz
Memory Interface SPI - Quad I/O
Voltage - Supply 2.7V ~ 3.6V
Memory Organization 16M x 8
Operating Temperature -40degC ~ 105degC (TA)
Supplier Device Package 16-SOIC

Getting Started

Engineers can interface this memory with most microcontrollers supporting SPI, Dual SPI, or Quad SPI protocols. Configuration is simplified through the Common Flash Interface (CFI) data, and software development should leverage the 256- or 512-byte page programming buffers to optimize write cycles. Programming and debugging can be performed using standard SPI flash programmers or JTAG/SWD debuggers through an attached MCU.

S25FL128SA Family

Part NumberDifferenceStock
S25FL128SAGMFVR01 VR01 668

Also Consider

MT25QL128ABA1ESE-0SIT Micron Technology Inc. - Offers a similar 128Mb density with high-performance Quad SPI support and wide software compatibility.
W25Q128JVSIM Winbond Electronics - A popular 128Mb alternative known for its broad ecosystem support and standard 8-pin SOIC package.
MX25L12833FM2I-10G Macronix - Provides a comparable 128Mb capacity with Multi-I/O capabilities and reliable performance for industrial applications.

Categories

Memory & Storage > NOR Flash