EmbeddedRelated.com
SARA-R510M8S-00B

u-bloxSARA-R510M8S-00B

u-blox
Cellular 5G, LTE Cat M1, LTE Cat NB2 Transceiver Module 600MHz, 700MHz, 750MHz, 800MHz, 850MHz, 900MHz, 1.7GHz, 1.8GHz, 1.9GHz, 2.1GHz Antenna Not Included Surface Mount
Active

Overview

The SARA-R510M8S-00B is a secure LTE-M and NB-IoT cellular module featuring an integrated u-blox M8 GNSS receiver for global positioning. Built on the UBX-R5 chipset, it supports 5G-ready Low Power Wide Area (LPWA) connectivity with a peak data rate of 1.2Mbps and a wide operating voltage range of 3V to 4.5V. This 96-pin LGA module is designed for long-term IoT deployments, offering high sensitivity of -167dBm and ultra-low power consumption in PSM deep-sleep mode.

Why Choose This Part

The module integrates u-blox's proprietary hardware-based Root of Trust, providing a high level of security for IoT applications. Its internal M8 GNSS receiver allows for concurrent cellular and positioning operations without the need for an external location chip. Engineers benefit from a comprehensive software stack that includes native support for MQTT-SN, LwM2M, and uFOTA for efficient remote lifecycle management.

Applications

Asset Tracking
Utilizes integrated GNSS and CellLocate for high-accuracy positioning of shipping containers and trailers across global cellular networks.
Smart Metering
Ideal for utility meters requiring deep indoor penetration via NB-IoT and multi-year battery life using PSM and eDRX modes.
Industrial Monitoring
Provides secure remote telemetry for industrial sensors using embedded TCP/UDP, MQTT, and CoAP protocols.
Connected Health
Enables reliable data transmission for wearable medical devices with secure boot and encrypted communication capabilities.

Key Specifications

Protocol 5G, LTE Cat M1, LTE Cat NB2
Data Rate 1.2Mbps
Frequency 600MHz, 700MHz, 750MHz, 800MHz, 850MHz, 900MHz, 1.7GHz, 1.8GHz, 1.9GHz, 2.1GHz
Sensitivity -167dBm
Antenna Type Antenna Not Included
Mounting Type Surface Mount
Package / Case 96-SMD Module
Power - Output 23dBm
Voltage - Supply 3V ~ 4.5V
Serial Interfaces GPIO, I2C, UART, USB
RF Family/Standard Cellular
Utilized IC / Part UBX-R5
Current - Receiving 95mA ~ 195mA
Operating Temperature -40degC ~ 85degC
Current - Transmitting 395mA

Getting Started

Evaluation is best performed using the EVK-R5 series development kits, which provide access to all interfaces via USB and header pins. The module is controlled through standard AT commands and can be managed via the u-blox m-center tool. Integration requires a 50-ohm cellular antenna and a separate GNSS antenna or a combined solution, with power delivery capable of handling up to 395mA peaks during transmission.

Also Consider

BG95-M3 Quectel - A popular multi-mode alternative supporting Cat M1, NB-IoT, and EGPRS with integrated GNSS.