EmbeddedRelated.com
The 2026 Embedded Online Conference
    Parts    SC0695
Raspberry Pi Compute Module 4 (CM4101000)

Raspberry Pi Compute Module 4 (CM4101000)

MPN: SC0695
Raspberry Pi
Single Board Computer 1.5GHz 4 Core 1GB/1GB RAM ARM Cortex-A72
Active1,283 in stock
Datasheet Digi-Key Compare Prices

Overview

The SC0695 is a Raspberry Pi Compute Module 4 (CM4) featuring a Broadcom BCM2711 quad-core Cortex-A72 processor running at 1.5GHz with 1GB of LPDDR4 RAM. It breaks out the Raspberry Pi 4 Model B internals into a compact System-on-Module (SoM) form factor using dual high-density 100-pin connectors.

Why Choose This Part

It offers a significant performance boost over previous generations with the ARM v8 architecture and 1.5GHz clock speed. The move to a high-density connector system improves mechanical stability and signal integrity for high-speed interfaces like PCIe and Gigabit Ethernet.

Applications

Industrial Control Systems
The 200-pin interface provides access to PCIe, dual HDMI, and 28 GPIO pins for custom industrial carrier boards.
Digital Signage
Supports hardware-accelerated H.265 4Kp60 decode and dual display output via MIPI DSI or HDMI.
Edge AI Gateway
The quad-core architecture and PCIe 2.0 x1 lane allow for interfacing with AI accelerators or high-speed networking.

Key Specifications

USB USB 2.0 (1)
Speed 1.5GHz
Ethernet GbE
Video Outputs CSI, DPI, DSI, HDMI
Core Processor ARM Cortex-A72
Number of Cores 4
Size / Dimension 2.170" x 1.570" (55.00mm x 40.00mm)
Digital I/O Lines 28
Storage Interface SDIO
Expansion Site/Bus I2C, SPI, UART
Operating Temperature -20degC ~ 75degC
RAM Capacity/Installed 1GB/1GB

Getting Started

Development requires a Raspberry Pi Compute Module 4 IO Board or a custom carrier board to access the 200-pin interface. Software development is typically performed using Raspberry Pi OS or standard Linux distributions via the SDIO interface for eMMC or microSD storage.

The 2026 Embedded Online Conference