EmbeddedRelated.com
    Parts   Test & Debug Tools  Oscilloscopes    SDS1202
SDS1202

SDS1202

Owon Technology Lilliput Electronics (USA) Inc
200 MHz Bench, Digital Oscilloscopes USB Interface LCD - Color Display 2 Analog Channel CAT II 400V Record, Save
Active98 in stock
Datasheet Digi-Key Compare Prices

Overview

The SDS1202 is a 200 MHz bench digital oscilloscope with two analog channels, a 1 GSa/s maximum sample rate and 20 kpts record length. It provides a color LCD, USB interface for data transfer, two passive 10:1 probes, 1 MOhm input impedance and a CAT II 400V rating. The scope supports record and save functions for waveform capture and PC storage.

Why Choose This Part

Practical 200 MHz bandwidth combined with 1 GSa/s sampling gives good time-domain fidelity for general-purpose lab work. Two analog channels let you compare signals or measure differential behavior without extra equipment, and included 10:1 passive probes simplify initial setup. USB connectivity and onboard record/save capabilities make it straightforward to archive waveforms to a PC for analysis or reporting.

Applications

Analog and mixed-signal debugging
Probe and visualize analog circuits, op-amps, filters and mixed-signal nodes up to 200 MHz bandwidth.
Embedded system timing and interface verification
Measure MCU clocks, PWM, and decode or monitor serial interfaces while saving traces over USB.
Transient and glitch capture
Use the 20 kpts memory and record/save features to capture and analyze intermittent events and signal anomalies.
Lab bench and education
Compact, easy-to-use bench oscilloscope for hands-on electronics labs, repair benches and classroom demonstrations.

Key Specifications

Type Bench, Digital
Channels 2 Analog
Function Record, Save
Bandwidth 200 MHz
Interface USB
Probe Type Passive 10:1 (2)
Memory Size 20kpts
Display Type LCD - Color
Input Impedance 1M
Rise Time (Typ) 1.7 ns
Voltage - Supply 100 ~ 240VAC
Voltage - Input (Max) CAT II 400V
Sampling Rate (Per Second) 1G

Getting Started

Mount and compensate the supplied 10:1 passive probes, set the probe attenuation on the scope to 10:1, and connect the probe ground securely. Plug the scope into a PC via USB and download/install the manufacturer's drivers/software from the vendor website to transfer or save waveforms. Consult the user manual for safety guidance on CAT II 400 V measurements and for using autoset and trigger controls to stabilize signals.

Also Consider

SDS1202X-E Siglent Technologies - 200 MHz, 2-channel bench oscilloscope with similar feature set from a different vendor.
DS1202Z-E Rigol Technologies - Rigol 2-channel 200 MHz series option commonly chosen as an alternative in bench scopes.

Categories

Test & Debug Tools > Oscilloscopes