EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 14hrs 16min 00sec
Learn More →
SFH601-3

SFH601-3

Vishay Semiconductor Opto Division
Optoisolator Transistor with Base Output 5000Vrms 1 Channel 6-DIP
Active2,303 in stock

Overview

The SFH601-3 is a single-channel optocoupler featuring a GaAs infrared emitting diode optically coupled to a phototransistor with an integrated base connection. It provides a high isolation voltage of 5000Vrms and is designed for applications requiring reliable signal isolation between high-voltage and low-voltage circuits. The inclusion of the base pin allows for customized switching speed and gain adjustments via external biasing.

Why Choose This Part

This component offers a high collector-emitter voltage rating of 100V and an isolation rating of 5000Vrms, ensuring robust protection in harsh environments. The low coupling capacitance and high common mode transient immunity reduce noise susceptibility in fast-switching power applications.

Applications

Industrial Logic Isolation
Used to interface 24V industrial logic levels with 3.3V or 5V microcontrollers while preventing ground loops.
Switch Mode Power Supplies
Provides feedback isolation between the secondary output and primary-side PWM controller.
Telecom Equipment
Isolates telephone lines from digital processing circuitry to protect against surges and transients.
Battery Powered Equipment
Maintains isolation between high-voltage battery stacks and low-voltage monitoring systems.

Key Specifications

Input Type DC
Output Type Transistor with Base
Mounting Type Through Hole
Package / Case 6-DIP (0.300", 7.62mm)
Number of Channels 1
Voltage - Isolation 5000Vrms
Vce Saturation (Max) 400mV
Operating Temperature -55degC ~ 100degC
Rise / Fall Time (Typ) 2us, 2us
Voltage - Output (Max) 100V
Supplier Device Package 6-DIP
Current - Output / Channel 50mA
Current Transfer Ratio (Max) 200% @ 10mA
Current Transfer Ratio (Min) 100% @ 10mA
Voltage - Forward (Vf) (Typ) 1.25V
Turn On / Turn Off Time (Typ) 3us, 2.3us
Current - DC Forward (If) (Max) 60 mA

Getting Started

To implement the SFH601-3, calculate the current-limiting resistor for the input LED based on the 1.65V maximum forward voltage and desired forward current. On the output side, use a pull-up resistor on the collector; if the base pin is not used for speed optimization, it can be left floating or tied to ground through a high-value resistor to improve noise immunity.

Also Consider

4N25 Vishay Semiconductor - A classic 6-pin optocoupler with base connection used when lower isolation voltages are acceptable.