EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 02hrs 33min 41sec
Learn More →
SFH618A-3X017T

SFH618A-3X017T

Vishay Semiconductor Opto Division
Optoisolator Transistor Output 5300Vrms 1 Channel 4-SMD
Active2,296 in stock

Overview

The SFH618A-3X017T is a single-channel phototransistor output optocoupler featuring a high isolation voltage of 5300Vrms and a 55V collector-emitter rating. It is designed for signal transmission between two electrically separated circuits, particularly where high common mode transient immunity and low coupling capacitance are required. This specific variant comes in a surface-mount 4-SMD gull-wing package for automated PCB assembly.

Why Choose This Part

This component offers excellent CTR linearity across varying forward currents and features low CTR degradation over time for improved long-term reliability. Its high 5300Vrms isolation and 55V output rating make it robust for high-voltage industrial applications, while the low coupling capacitance minimizes noise transfer.

Applications

Switch Mode Power Supplies (SMPS)
Providing feedback isolation between the secondary output and primary control side for voltage regulation.
Industrial Controller I/O
Protecting PLC inputs and outputs from high-voltage transients and ground loops in harsh factory environments.
System Tier Isolation
Separating low-voltage microcontroller logic from high-voltage power electronics to ensure operator safety.
Telecommunications Equipment
Used in line interface units and switching systems where 5300Vrms isolation is required for regulatory compliance.

Key Specifications

Input Type DC
Output Type Transistor
Mounting Type Surface Mount
Package / Case 4-SMD, Gull Wing
Number of Channels 1
Voltage - Isolation 5300Vrms
Vce Saturation (Max) 400mV
Operating Temperature -55degC ~ 100degC
Rise / Fall Time (Typ) 3.5us, 5us
Voltage - Output (Max) 55V
Supplier Device Package 4-SMD
Current - Output / Channel 50mA
Current Transfer Ratio (Max) 200% @ 1mA
Current Transfer Ratio (Min) 100% @ 1mA
Voltage - Forward (Vf) (Typ) 1.1V
Turn On / Turn Off Time (Typ) 6us, 5.5us
Current - DC Forward (If) (Max) 60 mA

Getting Started

Ensure the forward current (If) is tuned to meet the desired Current Transfer Ratio (CTR) based on the -3 binning specifications. When designing the PCB, maintain appropriate creepage and clearance distances under the 4-SMD package to preserve the 5300Vrms isolation rating. Use a standard transistor-output optocoupler test circuit with a current-limiting resistor on the LED side and a pull-up resistor on the collector side.