EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 13hrs 50min 42sec
Learn More →
SFH618A-4XSMT&R

SFH618A-4XSMT&R

Isocom Components 2004 LTD
Optoisolator Transistor Output 5300Vrms 1 Channel 4-SMD
Active792 in stock

Overview

The SFH618A-4XSMT&R is a single-channel optically coupled isolator consisting of an infrared emitting diode and an NPN silicon phototransistor in a space-saving 4-pin SMD package. It features a high isolation voltage of 5300Vrms and a high current transfer ratio (CTR) between 160% and 320% at a low 1mA input current. This component is designed to provide galvanic isolation between low-voltage control circuits and high-voltage loads or noisy environments.

Why Choose This Part

This part offers a high CTR at a very low 1mA forward current, which is ideal for low-power CMOS and MCU drive circuits. The 5300Vrms isolation rating and wide operating temperature range of -55C to +110C ensure reliable performance in harsh industrial environments. Its 4-pin SMD footprint allows for high-density PCB layouts compared to traditional through-hole packages.

Applications

Switch Mode Power Supplies (SMPS)
Used in the feedback loop to provide regulated output voltage while maintaining isolation between the primary and secondary stages.
Industrial Controller I/O
Protects sensitive microcontrollers and PLCs from voltage spikes and ground loops in industrial sensor and actuator interfaces.
System Logic Isolation
Communicates digital signals between systems operating at different ground potentials or across high-voltage barriers.
Battery Management Systems
Provides high-voltage safety isolation for monitoring signals in large battery arrays.

Key Specifications

Input Type DC
Output Type Transistor
Mounting Type Surface Mount
Package / Case 4-SMD, Gull Wing
Number of Channels 1
Voltage - Isolation 5300Vrms
Vce Saturation (Max) 400mV
Operating Temperature -30degC ~ 100degC
Rise / Fall Time (Typ) 4us, 3us
Voltage - Output (Max) 55V
Supplier Device Package 4-SMD
Current - Output / Channel 50mA
Current Transfer Ratio (Max) 320% @ 1mA
Current Transfer Ratio (Min) 160% @ 1mA
Voltage - Forward (Vf) (Typ) 1.5V (Max)
Current - DC Forward (If) (Max) 50 mA

Getting Started

When designing with this optoisolator, ensure the input current (If) is limited by a series resistor according to the 1.5V maximum forward voltage. Verify the output transistor's load resistor (Rl) is sized to stay within the 50mA collector current limit and meets the required 4us rise time for your baud rate. Maintain proper PCB creepage and clearance distances under the 4-SMD package to preserve the 5300Vrms isolation rating.