EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 19hrs 54min 44sec
Learn More →
SFH 300 FA-3/4

SFH 300 FA-3/4

ams OSRAM AG
Phototransistors 880nm Top View Radial
Active3,097 in stock

Overview

The SFH 300 FA-3/4 is a silicon NPN phototransistor housed in a black epoxy T1 3/4 radial package designed to filter out visible light. It features a peak sensitivity at 880nm, making it ideal for infrared sensing and optical communication links where high linearity is required.

Why Choose This Part

The integrated black epoxy package acts as a daylight filter, significantly reducing interference from ambient visible light. With a high collector-emitter breakdown voltage of 35V and low dark current of 50nA, it provides a high signal-to-noise ratio for precise optical sensing.

Applications

Infrared Remote Controls
Used as a receiver for IR signals in consumer electronics and home automation systems.
Optical Interrupters
High linearity makes it suitable for position sensing and speed measurement in industrial tachometers.
Light Curtains
Provides reliable detection in safety barriers and presence sensing due to its 50 degree viewing angle.
Data Transmission
Ideal for low-speed wireless infrared data links in harsh optical environments.

Key Specifications

Wavelength 880nm
Orientation Top View
Power - Max 200 mW
Mounting Type Through Hole
Viewing Angle 50deg
Package / Case Radial
Operating Temperature -40degC ~ 100degC
Current - Dark (Id) (Max) 50 nA
Current - Collector (Ic) (Max) 50 mA
Voltage - Collector Emitter Breakdown (Max) 35 V

Getting Started

Connect the collector to a positive supply through a load resistor and monitor the voltage at the emitter for a common-collector configuration. Ensure the 880nm peak matches your IR emitter's wavelength for maximum efficiency, and note the 50 degree viewing angle for mechanical alignment.

Also Consider

TEPT5600 Vishay Semiconductor - Consider this if you require a phototransistor sensitive to visible light rather than one with an IR filter.