EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 02hrs 15min 41sec
Learn More →
SFH 9206-6/7

SFH 9206-6/7

ams OSRAM AG
Reflective Optical Sensor 0.039" ~ 0.197" (1mm ~ 5mm) 6-SMD, Gull Wing
Active7,064 in stock

Overview

The SFH 9206-6/7 is a compact reflective optical sensor combining a 940nm infrared emitter and a silicon NPN phototransistor in a single surface-mount package. It is designed for short-range detection between 1mm and 5mm, featuring an integrated daylight cut-off filter to reduce interference from ambient light. This AEC-Q101 qualified component is ideal for automotive and industrial applications requiring reliable proximity or position sensing.

Why Choose This Part

The sensor offers high reliability with AEC-Q101 qualification and 2kV HBM ESD protection. Its surface-mount gull-wing package is compatible with IR reflow soldering and features electrical isolation between the emitter and detector to simplify circuit design.

Applications

End-of-Travel Sensing
Detecting the physical limit of mechanical assemblies in printers, scanners, or industrial actuators.
Automotive Control Systems
Used for non-contact switching and position detection in steering columns or dashboard controls.
Coin and Paper Detection
Monitoring the presence or movement of media in automated teller machines or vending equipment.
Index Counting
Detecting revolutions or movement increments by sensing reflective marks on a rotating shaft or disk.

Key Specifications

Output Type Phototransistor
Mounting Type Surface Mount
Response Time 30us
Package / Case 6-SMD, Gull Wing
Sensing Method Reflective
Sensing Distance 0.039" ~ 0.197" (1mm ~ 5mm)
Current - Collector (Ic) (Max) 10 mA
Current - DC Forward (If) (Max) 50 mA
Voltage - Collector Emitter Breakdown (Max) 30 V

Getting Started

To integrate this sensor, provide a constant current to the IR LED (typically 10-20mA) and use a pull-up resistor on the phototransistor collector to convert the light-induced current into a voltage signal for an MCU ADC or GPIO. Ensure proper alignment with the target surface within the 1mm to 5mm range for optimal signal-to-noise ratio.