EmbeddedRelated.com
    Parts    SG-210STF 16.0000ML5
SG-210STF 16.0000ML5

SG-210STF 16.0000ML5

EPSON
16 MHz XO (Standard) CMOS Oscillator 1.8V ~ 3.3V Standby (Power Down) 4-SMD, No Lead
Active1,445 in stock
Datasheet Digi-Key Compare Prices

Overview

The SG-210STF 16.0000ML5 is a 16 MHz CMOS crystal oscillator designed for stable clock generation in a compact 2.50mm x 2.00mm SMD package. It features a wide supply voltage range from 1.8V to 3.3V and includes a standby function that powers down the internal oscillation circuit to conserve energy. This component provides a reliable +/-50ppm frequency stability across an operating temperature range of -40 to +85 degrees Celsius.

Why Choose This Part

This oscillator simplifies power management by supporting a broad supply voltage range (1.8V to 3.3V), eliminating the need for dedicated voltage regulators in multi-rail systems. Its integrated standby function significantly reduces current consumption when the output is disabled, making it a superior choice for low-power applications compared to standard continuous-run oscillators.

Applications

Microcontroller Clocking
Provides a precise 16 MHz external clock source for MCUs that require higher accuracy than internal RC oscillators.
Battery-Powered Electronics
Utilizes the standby (power down) function to extend battery life when the system is in sleep mode.
Portable Consumer Devices
The small 2.5mm x 2.0mm footprint is ideal for space-constrained designs in handheld electronics.
Industrial Control Units
Reliable timing for logic circuits operating in harsh environments up to 85 degrees Celsius.

Key Specifications

Type XO (Standard)
Output CMOS
Function Standby (Power Down)
Frequency 16 MHz
Mounting Type Surface Mount
Base Resonator Crystal
Package / Case 4-SMD, No Lead
Size / Dimension 0.098" L x 0.079" W (2.50mm x 2.00mm)
Voltage - Supply 1.8V ~ 3.3V
Frequency Stability +/-50ppm
Height - Seated (Max) 0.035" (0.90mm)
Operating Temperature -40degC ~ 85degC
Current - Supply (Max) 1.8mA
Supplier Device Package 4-SMD (2.5x2)

Getting Started

To integrate this oscillator, connect Pin 1 (ST) to VCC for normal operation or GND to enter standby mode. Ensure a 0.01uF to 0.1uF bypass capacitor is placed as close as possible to the VCC pin (Pin 4) to minimize noise. Since it is a self-contained XO, no external load capacitors are required on the output (Pin 3), which should drive standard CMOS logic levels.

SG-210STF 16.0000 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Voltage Temp Range Stock
SG-210STF 16.0000ML5 (this part) 1.8V -40degC ~ 85degC 1,445
SG-210STF 16.0000ML 1.6V -40degC ~ 85degC 321
SG-210STF 16.0000ML0 1.6V -40degC ~ 85degC 1,400
SG-210STF 16.0000ML3 1.6V -40degC ~ 85degC 147
SG-210STF 16.0000MY5 1.8V -40degC ~ 105degC —
SG-210STF 16.0000MY0 1.8V -40degC ~ 105degC —
SG-210STF 16.0000MY 1.8V -40degC ~ 105degC —
SG-210STF 16.0000MY3 1.6V -40degC ~ 105degC —

Also Consider

ASE-16.000MHZ-L-C-T Abracon - A 16 MHz CMOS oscillator in a larger 3.2mm x 2.5mm package for designs where PCB space is less critical.