EmbeddedRelated.com
    Parts   Clocks & Timing  Crystal Oscillators    SG-210STF 24.0000ML5
SG-210STF 24.0000ML5

SG-210STF 24.0000ML5

EPSON
24 MHz XO (Standard) CMOS Oscillator 1.8V ~ 3.3V Standby (Power Down) 4-SMD, No Lead
Active1,601 in stock
Datasheet Digi-Key Compare Prices

Overview

The SG-210STF 24.0000ML5 is a compact 24 MHz CMOS crystal oscillator designed for reliable clock generation in space-constrained designs. It operates across a wide supply voltage range from 1.8V to 3.3V and features a standby function to minimize power consumption in battery-operated devices. With a 2.5mm x 2.0mm footprint, it provides a stable frequency reference for microcontrollers and digital signal processors.

Why Choose This Part

This oscillator supports a multi-voltage range of 1.8V to 3.3V, eliminating the need for dedicated voltage regulators for the clock source. Its tiny 2520 SMD package saves significant PCB real estate compared to traditional 3.2mm x 2.5mm or larger oscillators. Additionally, the +/-50ppm frequency stability ensures consistent performance over its full operating temperature range.

Applications

Microcontroller Clocking
Provides a high-accuracy 24 MHz external clock source for MCUs that require better stability than internal RC oscillators.
Battery-Powered Electronics
Utilizes the standby (power down) function to reduce current draw and extend battery life when the system is idle.
Communication Interfaces
Acts as a timing reference for synchronous serial protocols and low-speed wireless transceivers.
Industrial Sensors
Provides stable timing in environments ranging from -40 C to +85 C for industrial data acquisition.

Key Specifications

Type XO (Standard)
Output CMOS
Function Standby (Power Down)
Frequency 24 MHz
Mounting Type Surface Mount
Base Resonator Crystal
Package / Case 4-SMD, No Lead
Size / Dimension 0.098" L x 0.079" W (2.50mm x 2.00mm)
Voltage - Supply 1.8V ~ 3.3V
Frequency Stability +/-50ppm
Height - Seated (Max) 0.035" (0.90mm)
Operating Temperature -40degC ~ 85degC
Current - Supply (Max) 2.2mA
Supplier Device Package 4-SMD (2.5x2)

Getting Started

To integrate this oscillator, connect the output pin to the OSC_IN or XTAL1 pin of your target microcontroller and ensure a 0.1uF bypass capacitor is placed close to the VCC pin. Use the ST pin to control the standby mode; pulling this pin low will stop the oscillation and significantly reduce current consumption. Ensure the PCB trace for the 24 MHz signal is kept as short as possible to minimize EMI and signal degradation.

SG-210STF 24.0000 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Voltage Frequency Stability Temp Range Stock
SG-210STF 24.0000ML5 (this part) 1.8V +/-50ppm -40degC ~ 85degC 1,601
SG-210STF 24.0000ML 1.6V +/-50ppm -40degC ~ 85degC 14,561
SG-210STF 24.0000MY0 1.6V +/-50ppm -40degC ~ 105degC 500
SG-210STF 24.0000MS0 1.6V +/-25ppm -20degC ~ 70degC —
SG-210STF 24.0000MY5 1.8V +/-50ppm -40degC ~ 105degC —
SG-210STF 24.0000MY3 1.6V +/-50ppm -40degC ~ 105degC —
SG-210STF 24.0000MS3 1.6V +/-25ppm -20degC ~ 70degC —
SG-210STF 24.0000MY 1.6V +/-50ppm -40degC ~ 105degC —
SG-210STF 24.0000MS5 1.8V +/-25ppm -20degC ~ 70degC —

Also Consider

ASE Series Abracon - A standard 3.2mm x 2.5mm CMOS oscillator if a slightly larger, more common footprint is preferred for easier prototyping.

Categories

Clocks & Timing > Crystal Oscillators