EmbeddedRelated.com
    Parts   Clocks & Timing  Crystal Oscillators    SG-210STF 24.0000MS3
SG-210STF 24.0000MS3

SG-210STF 24.0000MS3

EPSON
24 MHz XO (Standard) CMOS Oscillator 1.6V ~ 3.6V Standby (Power Down) 4-SMD, No Lead
Active
Datasheet Digi-Key Compare Prices

Overview

The SG-210STF is a 24 MHz CMOS crystal oscillator designed for low-power electronic systems. It features a wide supply voltage range of 1.6V to 3.6V and a compact 2.5mm x 2.0mm footprint, making it suitable for modern battery-operated and space-constrained applications. The integrated standby function allows the device to power down when the clock signal is not required, significantly reducing current consumption.

Why Choose This Part

The oscillator provides excellent stability with a frequency tolerance of +/-25ppm or +/-50ppm depending on the specific variant. Its wide operating temperature range of -40 to +85 degrees Celsius and broad voltage support (1.6V to 3.6V) allow it to operate in varied environments without additional voltage regulation.

Applications

Microcontroller Clocking
Provides a stable 24 MHz reference clock for MCUs and SoCs in consumer and industrial electronics.
Battery-Powered Handhelds
Utilizes the standby function to preserve battery life in portable devices when in sleep modes.
Interface Logic
Driving timing for USB controllers, Ethernet PHYs, or other digital logic requiring a CMOS-level clock.
IoT Sensor Nodes
Small form factor and low voltage operation facilitate integration into compact wireless sensor housings.

Key Specifications

Type XO (Standard)
Output CMOS
Function Standby (Power Down)
Frequency 24 MHz
Mounting Type Surface Mount
Base Resonator Crystal
Package / Case 4-SMD, No Lead
Size / Dimension 0.098" L x 0.079" W (2.50mm x 2.00mm)
Voltage - Supply 1.6V ~ 3.6V
Frequency Stability +/-25ppm
Height - Seated (Max) 0.035" (0.90mm)
Operating Temperature -20degC ~ 70degC
Current - Supply (Max) 2.2mA
Supplier Device Package 4-SMD (2.5x2)

Getting Started

When designing the PCB layout, place a 0.01uF to 0.1uF bypass capacitor as close as possible to the Vcc pin to minimize noise. Ensure the trace length from the oscillator output to the target IC is minimized to prevent signal degradation and EMI issues. Verify the standby (ST) pin logic levels to ensure the oscillator is active during normal operation.

SG-210STF 24.0000 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Voltage Frequency Stability Temp Range Stock
SG-210STF 24.0000MS3 (this part) 1.6V +/-25ppm -20degC ~ 70degC —
SG-210STF 24.0000ML 1.6V +/-50ppm -40degC ~ 85degC 14,561
SG-210STF 24.0000ML5 1.8V +/-50ppm -40degC ~ 85degC 1,601
SG-210STF 24.0000MY0 1.6V +/-50ppm -40degC ~ 105degC 500
SG-210STF 24.0000MY5 1.8V +/-50ppm -40degC ~ 105degC —
SG-210STF 24.0000MY 1.6V +/-50ppm -40degC ~ 105degC —
SG-210STF 24.0000MS0 1.6V +/-25ppm -20degC ~ 70degC —
SG-210STF 24.0000MY3 1.6V +/-50ppm -40degC ~ 105degC —
SG-210STF 24.0000MS5 1.8V +/-25ppm -20degC ~ 70degC —

Also Consider

ASE Series Abracon - Provides a similar 24 MHz CMOS output in a slightly larger 3.2mm x 2.5mm package for designs with more board space.
DSC1001 MCHPMicrochip Technology - A low-power MEMS oscillator with high stability and a standby function in a compatible 2.5mm x 2.0mm package.

Categories

Clocks & Timing > Crystal Oscillators