SM04B-SRSS-TB(LF)(SN)
JST
Same family in a 4-position layout for applications requiring more connections while keeping the same mating housings.
Active3,241 in stock
Overview
The SM04B-SRSS-TB(LF)(SN) is a 4-position, 1.0mm pitch SH series wire-to-board header from JST. This surface-mount, right-angle connector is designed for high-density applications where a secure connection and low profile are required. It features a shrouded 4-wall design to protect contacts and prevent mismating in compact electronics.
Why Choose This Part
The 1.0mm pitch provides significant space savings compared to standard 2.0mm or 2.54mm headers. It includes solder retention features to ensure mechanical stability on the PCB during mating and unmating cycles. The side-entry (right-angle) orientation allows for a lower vertical profile in slim enclosures.
Applications
Internal Signal Routing
Connecting peripheral modules to a main PCB in space-constrained handheld devices.
Sensor Interfacing
Providing a reliable 4-pin interface for I2C or SPI sensors requiring power, ground, and two signal lines.
Battery Connections
Linking small lithium-polymer battery packs to charging circuitry in wearable hardware.
Display Backlighting
Powering LED backlight arrays in small-scale LCD modules.
Key Specifications
Style
Board to Cable/Wire
Features
Solder Retention
Shrouding
Shrouded - 4 Wall
Termination
Solder
Contact Type
Male Pin
Contact Shape
Square
Mounting Type
Surface Mount, Right Angle
Connector Type
Header
Fastening Type
Push-Pull
Number of Rows
1
Pitch - Mating
0.039" (1.00mm)
Voltage Rating
50V
Contact Material
Copper Alloy
Insulation Color
Natural
Insulation Height
0.114" (2.90mm)
Insulation Material
Polyamide (PA), Nylon
Number of Positions
4
Contact Finish - Post
Tin
Current Rating (Amps)
1A
Operating Temperature
-25degC ~ 85degC
Contact Finish - Mating
Tin
Number of Positions Loaded
All
Material Flammability Rating
UL94 V-0
Also Consider
SM02B-SRSS-TB(LF)(SN)
JST
- A 2-position variant from the same SH series if only power or a single signal path is required.
