TISN65176BDR
Overview
The SN65176BDR is a differential bus transceiver designed for bidirectional data communication on multipoint bus transmission lines. It combines a 3-state differential line driver and a differential input line receiver, both operating from a single 5V power supply. This device is fully compliant with ANSI standards TIA/EIA-422-B and TIA/EIA-485-A, making it a standard choice for robust industrial networking.
Why Choose This Part
The transceiver features a high minimum receiver input impedance of 12k ohms and a wide input/output bus voltage range of -7V to 12V. It includes thermal shutdown protection and driver current limiting for increased reliability against bus faults. The 50mV typical receiver hysteresis improves noise immunity in harsh signaling environments.
Applications
Key Specifications
Getting Started
To use this part, provide a stable 5V supply and place a 0.1uF bypass capacitor close to the VCC pin. Ensure the bus is terminated with 120-ohm resistors at both ends of the cable to minimize reflections. The DE (Driver Enable) and /RE (Receiver Enable) pins can be tied together for simple half-duplex control from a single GPIO.
