EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
25days 07hrs 42min 42sec
Learn More →
SN74AHC1G125DBVR

TISN74AHC1G125DBVR

Texas Instruments
Buffer, Non-Inverting 1 Element 1 Bit per Element 3-State Output SOT-23-5
Active24,815 in stock

Overview

The SN74AHC1G125DBVR is a single-channel, non-inverting bus buffer with a 3-state output, designed for a wide supply voltage range of 2V to 5.5V. It features an active-low output-enable (OE) input that, when high, places the output in a high-impedance state to prevent bus contention. This component is ideal for signal isolation and level-shifting applications in mixed-voltage systems.

Why Choose This Part

The device provides a compact SOT-23-5 footprint that saves significant board space compared to multi-gate ICs. Its high-impedance state at 0V VCC ensures logic isolation during power-down, while the low power consumption of 10uA makes it suitable for battery-operated designs.

Applications

Bus Signal Isolation
Used to disconnect a sub-circuit from a shared data bus using the high-impedance 3-state output.
Voltage Down-Translation
Safe interfacing of higher voltage logic signals to lower voltage downstream components thanks to its input tolerance.
Microcontroller I/O Buffering
Protects MCU pins and increases drive capability by providing up to 8mA of output current.
Control Signal Routing
Managing chip-select or enable lines in complex digital systems where multiple devices share control paths.

Key Specifications

Logic Type Buffer, Non-Inverting
Output Type 3-State
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Voltage - Supply 2V ~ 5.5V
Number of Elements 1
Operating Temperature -40degC ~ 125degC (TA)
Supplier Device Package SOT-23-5
Current - Output High, Low 8mA, 8mA
Number of Bits per Element 1

Getting Started

Integrate this buffer by connecting the OE pin to a GPIO for bus control and ensuring the supply voltage matches the desired output logic level. Decouple the VCC pin with a 0.1uF ceramic capacitor placed close to the SOT-23 package to minimize switching noise.

SN74AHC1G125 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Stock
SN74AHC1G125DBVR (this part) SC-74A, SOT-753 24,815
SN74AHC1G125DCKR TSSOP-5 15,833

Also Consider

SN74LVC1G125DBVR TITexas Instruments - Provides higher drive strength and 5V-tolerant inputs when running at lower supply voltages.