EmbeddedRelated.com
    Parts    SN74HC00PWR
SN74HC00PWR

TISN74HC00PWR

Texas Instruments
NAND Gate IC 4 Channel 14-TSSOP
Active15,912 in stock
Datasheet Digi-Key Compare Prices

Overview

The SN74HC00PWR is a high-speed CMOS quadruple 2-input NAND gate designed for logic operations within a 2V to 6V supply range. It provides buffered inputs to improve noise immunity and can drive up to 10 LSTTL loads with significantly lower power consumption than traditional bipolar logic. This IC is a fundamental building block for digital logic circuits, offering high-speed switching with minimal static power dissipation.

Why Choose This Part

This device features a wide operating voltage range from 2V to 6V, allowing it to interface with various battery and regulated power systems. It offers low power consumption with a maximum sleep current of 20uA and supports a generous output current of 25mA per channel. The TSSOP-14 package provides a compact footprint for high-density PCB designs while maintaining standard 2.0mm pitch compatibility.

Applications

Digital Logic Gating
Performing fundamental NAND logic operations in control circuitry and state machines.
Signal Inversion
Utilizing the NAND gate with tied inputs or one input tied high to act as a logic inverter.
Oscillator Circuits
Creating simple RC or crystal oscillators for clock generation in low-speed applications.
Level Shifting
Interfacing between different logic levels when operating at specific supply voltages within the 2V to 6V range.
Enable/Disable Control
Using one input as a gate to control the passage of a signal or clock pulse.

Key Specifications

Logic Type NAND Gate
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173", 4.40mm Width)
Number of Inputs 2
Voltage - Supply 2V ~ 6V
Number of Circuits 4
Operating Temperature -40degC ~ 85degC
Input Logic Level - Low 0.5V ~ 1.8V
Supplier Device Package 14-TSSOP
Input Logic Level - High 1.5V ~ 4.2V
Current - Quiescent (Max) 2 uA
Current - Output High, Low 5.2mA, 5.2mA
Max Propagation Delay @ V, Max CL 15ns @ 6V, 50pF

Getting Started

To evaluate this part, use a 14-pin TSSOP breakout board for breadboarding or prototype testing. Ensure a 0.1uF ceramic decoupling capacitor is placed close to the VCC pin (pin 14) to minimize switching noise. Logic levels must be maintained within the specified low (0.5V to 1.8V) and high (1.5V to 4.2V) thresholds depending on the supply voltage used.

SN74HC00 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Stock
SN74HC00PWR (this part) TSSOP-14 15,912
SN74HC00N DIP-14 10,942