EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 02hrs 44min 33sec
Learn More →
ST3232CDR

ST3232CDR

STMicroelectronics
2/2 Transceiver Full RS232 16-SO
Active14,062 in stock

Overview

The ST3232CDR is a low-power 3V to 5.5V RS-232 transceiver that provides two drivers and two receivers in a 16-SOIC package. It is designed to bridge the gap between low-voltage microcontrollers and the high-voltage requirements of RS-232 serial communication. This part is particularly effective for systems requiring a minimum guaranteed data rate of 300 kbps while maintaining very low supply current.

Why Choose This Part

The ST3232CDR excels in low-power environments with a typical supply current of only 0.3mA under no-load conditions. It guarantees a minimum 300 kbps data rate and a 6 V/us slew rate, ensuring robust performance across the full 3V to 5.5V supply range. The internal charge pump allows it to meet EIA/TIA-232 specifications using only four small external capacitors.

Applications

Industrial Control Interfaces
Connecting 3.3V or 5V logic controllers to legacy RS-232 industrial equipment and sensors.
Embedded System Debug Ports
Providing a reliable serial console for hardware debugging and firmware updates in commercial electronics.
Point of Sale (POS) Terminals
Managing serial communication between main processing units and peripherals like barcode scanners or receipt printers.
Networking Equipment
Serving as the physical layer interface for console management ports on switches and routers.

Key Specifications

Type Transceiver
Duplex Full
Protocol RS232
Data Rate 400kbps
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154", 3.90mm Width)
Voltage - Supply 3V ~ 5.5V
Receiver Hysteresis 300 mV
Operating Temperature 0degC ~ 70degC
Supplier Device Package 16-SO
Number of Drivers/Receivers 2/2

Getting Started

To use the ST3232CDR, connect four 0.1uF charge pump capacitors to the C1+, C1-, C2+, and C2- pins and ensure a stable VCC between 3V and 5.5V. Route your microcontroller UART TX/RX lines to the TTL/CMOS input/output pins and connect the RS-232 transceiver pins to a standard DB9 connector. For prototyping, this IC is easily used with SOIC-to-DIP adapter boards on a standard breadboard.

ST3232 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Data Rate Package Receiver Hysteresis Temp Range Stock
ST3232CDR (this part) 400k SOIC-16 300 mV 0degC ~ 70degC 14,062
ST3232EBDR 250k SOIC-16 500 mV -40degC ~ 85degC 20,598
ST3232EBTR Tape & Reel 250k TSSOP-16 500 mV -40degC ~ 85degC 23,946
Also available as: ST3232BDR

Also Consider

MAX3232ESE+ Analog Devices / Maxim Integrated - The industry-standard alternative with similar 3.0V to 5.5V operation and pin compatibility.
TRS3232EIDR TITexas Instruments - Provides enhanced ESD protection for the RS-232 pins, which is useful in harsh industrial environments.