EmbeddedRelated.com
The 2026 Embedded Online Conference
STM32C011F4U6TR

STM32C011F4U6TR

STMicroelectronics
ARM® Cortex®-M0+ STM32C0 Microcontroller IC 32-Bit 48MHz 16KB (16K x 8) FLASH 20-UFQFPN (3x3)
Active5,004 in stock

Overview

The STM32C011F4U6TR is an entry-level 32-bit microcontroller based on the Arm Cortex-M0+ core, designed to bridge the gap between 8-bit and 32-bit applications. Operating at 48MHz with 16KB of Flash and 6KB of RAM, it provides a cost-effective solution with a small 3x3mm UFQFPN20 footprint for space-constrained designs. The MCU includes essential peripherals like a 12-bit ADC, multiple timers, and standard serial interfaces while maintaining low power consumption.

Why Choose This Part

This MCU offers a significantly higher performance-to-cost ratio than traditional 8-bit microcontrollers while utilizing the modern Arm Cortex-M0+ architecture. It features a high-density 20-pin package with 18 available I/Os and 5V tolerance, simplifying interfacing with legacy hardware. The inclusion of a 12-bit SAR ADC with 15 channels provides high-resolution analog sensing in a very small PCB area.

Applications

Small Home Appliances
Ideal for controlling motor logic and user interfaces in blenders, coffee makers, or air purifiers where low cost and small physical size are priorities.
Sensor Hubs
Functions as a local controller to aggregate data from multiple sensors via I2C or SPI and transmit it to a main processor or communication module.
Simple Industrial Controllers
Suitable for basic PLC-like logic, valve control, or monitoring stations that require robust operation and 5V tolerant I/Os.
Battery-Powered Handhelds
Utilizes low-power modes such as Standby (12.5uA) and Shutdown (31nA) to extend battery life in simple portable devices.

Key Specifications

Speed 48MHz
RAM Size 6K x 8
Core Size 32-Bit
Peripherals Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
Connectivity I2C, IrDA, LINbus, SPI, UART/USART
Mounting Type Surface Mount
Number of I/O 18
Core Processor ARM Cortex-M0+
Package / Case 20-UFQFN
Data Converters A/D 15x12b SAR
Oscillator Type External, Internal
Program Memory Size 16KB (16K x 8)
Program Memory Type FLASH
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 20-UFQFPN (3x3)
Voltage - Supply (Vcc/Vdd) 2V ~ 3.6V

Getting Started

Start development using the STM32Cube ecosystem, including STM32CubeIDE and the STM32CubeC0 MCU Package for HAL and LL drivers. Hardware evaluation can be performed on the NUCLEO-C0116C board, which includes an integrated ST-LINK debugger. The chip supports Serial Wire Debug (SWD) for programming and real-time debugging.

STM32C011 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number I/O Pins Package ADC/DAC Flash Stock
STM32C011F4U6TR (this part) Tape & Reel 18 UFQFN-20 A/D 15x12b SAR 16KB 5,004
STM32C011F6U6TR Tape & Reel 18 UFQFN-20 A/D 15x12b SAR 32KB 16,987
STM32C011J6M6 6 SOIC-8 A/D 7x12b SAR 32KB 9,550
STM32C011F4P6 18 TSSOP-20 A/D 15x12b SAR 16KB 2,406
Also available as: STM32C011F4U7TR

Also Consider

STM32G030F6P6 STMicroelectronics - Offers more Flash (32KB) and RAM (8KB) in a TSSOP-20 package for slightly more complex firmware requirements.
The 2026 Embedded Online Conference