EmbeddedRelated.com
    Parts   Microcontrollers  ARM Cortex-M0 / M0+    STM32 Family    STM32L010    STM32L010K4T6
STM32L010K4T6

STM32L010K4T6

STMicroelectronics
ARM® Cortex®-M0+ STM32L0 Microcontroller IC 32-Bit 32MHz 16KB (16K x 8) FLASH 32-LQFP (7x7)
Active7,307 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The STM32L010K4T6 is an entry-level ultra-low-power 32-bit microcontroller based on the Arm Cortex-M0+ core operating at 32MHz. It features 16KB of Flash memory, 2KB of RAM, and 128 bytes of integrated EEPROM, all housed in a compact 32-pin LQFP package. This MCU is designed specifically for power-sensitive applications requiring a balance of performance and extreme efficiency.

Why Choose This Part

The device excels in power management with a standby current as low as 0.41 uA and multiple low-power modes to optimize energy consumption. It includes 5V-tolerant I/Os and an integrated EEPROM, which simplifies bill-of-materials by eliminating the need for external data storage for calibration or state data.

Applications

Battery-Powered Sensors
Ideal for remote environmental sensors or smoke detectors that require multi-year battery life from a single coin cell.
Wearable Devices
Suitable for simple health trackers or smart apparel where small form factor and low standby current are critical.
Industrial Portables
Used in hand-held measurement tools that benefit from the 1.8V to 3.6V operating range and low-power run modes.

Key Specifications

Speed 32MHz
RAM Size 2K x 8
Core Size 32-Bit
EEPROM Size 128 x 8
Peripherals Brown-out Detect/Reset, DMA, POR, PWM, WDT
Connectivity I2C, IrDA, SPI, UART/USART
Mounting Type Surface Mount
Number of I/O 26
Core Processor ARM Cortex-M0+
Package / Case 32-LQFP
Data Converters A/D 10x12b
Oscillator Type Internal
Program Memory Size 16KB (16K x 8)
Program Memory Type FLASH
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 32-LQFP (7x7)
Voltage - Supply (Vcc/Vdd) 1.8V ~ 3.6V

Getting Started

Engineers can begin development using the STM32CubeL0 software package and the STM32CubeIDE toolchain. Hardware prototyping is typically done with a NUCLEO-L011K4 development board, which includes an integrated ST-LINK debugger for serial wire debug (SWD) access.

Dev Boards

Development boards and breakout modules featuring the STM32L010K4T6 or compatible chips — ready to use for prototyping.

STM32L0538-DISCO STMicroelectronics
STM32L053C8 Discovery STM32L0 ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board
Digi-Key 36 in stock
NUCLEO-L073RZ STMicroelectronics
Development Boards & Kits - ARM STM32 Nucleo-64 development board STM32L073RZ MCU, supports Arduino & ST morpho
Digi-Key Mouser 263 in stock
Part of STM32 family » STM32L010

STM32L010 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number RAM EEPROM Size I/O Pins Package Flash Stock
STM32L010K4T6 (this part) 2K 128 x 8 26 LQFP-32 16KB 7,307
STM32L010C6T6 8K 256 x 8 38 LQFP-48 32KB 15,852

Also Consider

STM32L031K6T6 STMicroelectronics - Offers more Flash memory (32KB) and additional peripherals while maintaining the same 32-LQFP footprint.
STM32L432KCU6 STMicroelectronics - A higher performance Cortex-M4 alternative with an FPU for power-efficient mathematical processing in the same pin count.

Categories

Microcontrollers > ARM Cortex-M0 / M0+ Microcontrollers > STMicroelectronics