EmbeddedRelated.com
    Parts    Semtech SX12xx LoRa Family    SX1276    SX1276MB1LAS
SX1276MB1LAS

SX1276MB1LAS

Semtech Corporation
General ISM < 1GHz Transceiver Module 433MHz, 915MHz Antenna Not Included, SMA Through Hole
Active15 in stock
Datasheet Digi-Key Compare Prices

Overview

The SX1276MB1LAS is a Semtech sub-1 GHz transceiver module based on the SX1276 family, provided with an SMA through-hole connector (antenna not included). It targets ISM bands such as 433 MHz and 915 MHz and supports LoRa and legacy modulations (FSK/OOK). The module is sized for easy integration into IoT and LPWAN end nodes.

Why Choose This Part

The module form factor with a through-hole SMA connector simplifies antenna selection and mechanical mounting during prototyping. Based on Semtech's SX1276 transceiver, it supports LoRa plus legacy modulations, enabling flexible tradeoffs between range and data rate. Using a pre-matched module reduces RF design effort compared with integrating the bare IC directly.

Applications

Long-range IoT sensors
Battery-powered environmental or agricultural sensors that need multi-kilometer uplink range in sub-GHz ISM bands.
Remote telemetry and metering
Utility or industrial telemetry nodes that require robust, low-data-rate links over long distances.
Asset tracking
Low-power location or status trackers operating on 433/915 MHz with improved penetration and range.
Industrial wireless monitoring
Machine or process monitoring where sub-GHz propagation and interference tolerance are beneficial.

Key Specifications

Data Rate 300kbps
Frequency 433MHz, 915MHz
Modulation FSK, GFSK, GMSK, MSK, OOK
Sensitivity -148dBm
Antenna Type Antenna Not Included, SMA
Mounting Type Through Hole
Package / Case Module
Power - Output 20dBm
Voltage - Supply 1.8V ~ 3.7V
Serial Interfaces SPI
RF Family/Standard General ISM < 1GHz
Current - Receiving 12mA
Operating Temperature -40degC ~ 85degC
Current - Transmitting 120mA

Getting Started

Consult Semtech datasheets and the module evaluation notes for pinout, SPI interface, and power requirements before connecting a host MCU. Typical host integration uses an MCU with an SPI peripheral (Arduino, STM32, ESP32, etc.) and existing libraries such as LMIC or RadioHead for LoRa stacks. Remember to provide a proper antenna matched to the SMA connector and verify operation against regional ISM regulations.

Part of Semtech SX12xx LoRa family » SX1276

SX1276 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Frequency Package RF Family/Standard Rx Current Tx Current Stock
SX1276MB1LAS (this part) 433M Module 1GHz 12mA 120mA 15
SX1276IMLTRT 137M VQFN-28 802.15.4 10.8mA 20mA 38,867
Also available as: SX1276

Also Consider

RFM95W-915S2 HopeRF - Widely used compact LoRa module available in 915 MHz variant.

Featured in Projects

USB-C RF Receiver for Wireless Temperature/Humidity Sensors
Intermediate · 11 parts · ~$15-35
Build your own project with the Project Advisor