EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 20hrs 40min 35sec
Learn More →
TC4427ACOA

MCHPTC4427ACOA

Microchip Technology
Low-Side Gate Driver IC Non-Inverting 8-SOIC
Active5,929 in stock

Overview

The TC4427ACOA is a dual non-inverting low-side MOSFET driver capable of delivering 1.5A peak output current. It operates over a wide 4.5V to 18V supply range and features high-speed switching with matched 25ns rise and fall times. This IC is designed to interface between low-power logic and high-capacitance power MOSFET gates, providing the necessary drive current for efficient switching.

Why Choose This Part

The TC4427ACOA offers latch-up protection and can withstand up to 5V of negative swing on its inputs, enhancing system robustness. Its low 7-ohm output impedance and matched timing characteristics ensure minimal delay and high drive capability even under heavy capacitive loads. The 2.4V high-level logic input makes it compatible with both TTL and CMOS logic levels.

Applications

Switch Mode Power Supplies (SMPS)
Driving high-side or low-side MOSFETs in DC-DC converters to improve efficiency and reduce switching losses.
Pulse Transformer Drive
Providing the high peak currents required to drive pulse transformers in isolated signal or power paths.
Line Drivers
Driving capacitive loads in digital communication lines where fast signal transitions are required.
Motor Control
Interfacing microcontrollers with power MOSFETs in H-bridge or half-bridge motor drive circuits.

Key Specifications

Gate Type MOSFET (N-Channel, P-Channel)
Input Type Non-Inverting
Channel Type Independent
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Voltage - Supply 4.5V ~ 18V
Number of Drivers 2
Driven Configuration Low-Side
Operating Temperature 0degC ~ 70degC (TA)
Rise / Fall Time (Typ) 25ns, 25ns
Supplier Device Package 8-SOIC
Logic Voltage - VIL, VIH 0.8V, 2.4V
Current - Peak Output (Source, Sink) 1.5A, 1.5A

Getting Started

To use this part, decouple the VDD pin with a 1.0uF ceramic capacitor placed as close to the 8-SOIC package as possible to handle high peak currents. Ensure PCB traces to the MOSFET gates are short and wide to minimize parasitic inductance. Evaluation can be performed by prototyping on a SOIC-to-DIP adapter or using the TC4427CPA PDIP variant for breadboarding.

TC4427 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Rise / Fall Time (Typ) Stock
TC4427ACOA (this part) SOIC-8 25ns, 25ns 5,929
TC4427CPA DIP-8 19ns, 19ns 4,837