EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 05hrs 32min 58sec
Learn More →
TCAN1145DYYRQ1

TITCAN1145DYYRQ1

Texas Instruments
1/1 Transceiver Half CANbus 14-SOT-23-THIN
Active4,773 in stock

Overview

The TCAN1145DYYRQ1 is a high-speed CAN FD transceiver designed for automotive applications with integrated selective wake-up functionality. It supports data rates up to 5 Mbps and complies with ISO 11898-2:2016 standards, offering advanced power management features through its SPI interface. This functional safety-capable device allows for significant reduction in total system power consumption by enabling nodes to remain in sleep mode unless specifically addressed.

Why Choose This Part

This transceiver excels in power-sensitive designs with a 2.5 uA sleep current and 60 uA standby current. It integrates a 14-pin SOT-23-THIN package that saves PCB space while providing SPI-based diagnostics and configuration. The device's wide I/O voltage support (1.8V to 5V) ensures direct compatibility with modern low-voltage microprocessors without level shifters.

Applications

Automotive Body Control Modules
Reduces standby current in complex vehicle networks by only waking specific ECUs via Selective Wake (ISO 11898-3).
Advanced Driver Assistance Systems (ADAS)
Provides reliable CAN FD communication for high-bandwidth sensor data with AEC-Q100 Grade 1 reliability.
Electric Vehicle Battery Management
Operates across a wide 4.5V to 28V supply range to monitor cell data while maintaining low quiescent current.
Industrial Automation Control
Utilizes 58V bus fault protection and 12V common mode range for robust communication in harsh electrical environments.

Key Specifications

Type Transceiver
Duplex Half
Protocol CANbus
Data Rate 5Mbps
Mounting Type Surface Mount
Package / Case SOT-23-14 Thin, SOT-23 Variant
Voltage - Supply 4.5V ~ 28V
Receiver Hysteresis 135 mV
Operating Temperature -40degC ~ 150degC (TJ)
Supplier Device Package 14-SOT-23-THIN
Number of Drivers/Receivers 1/1

Getting Started

Start development using the TCAN1145EVM evaluation module, which provides access to all pins and bus signals. Configure the device registers over SPI to test selective wake-up patterns and monitor fault flags. Ensure proper 120-ohm termination is applied to the CAN bus and verify that the VIO pin matches your microcontroller's logic level.

Also Consider

TCAN1042V-Q1 TITexas Instruments - A more cost-effective CAN FD transceiver without the SPI-based selective wake or extensive diagnostic features.
MCP2562FD MCHPMicrochip Technology - A standard high-speed CAN FD transceiver widely used in industrial applications requiring a dedicated VIO pin.