EmbeddedRelated.com
    Parts   Power Management  DC-DC Converters    TEN 3-2411WIN
TEN 3-2411WIN

TEN 3-2411WIN

Traco Power
Isolated Module DC DC Converter 1 Output 5V 600mA 9V - 36V Input
Active625 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The TEN 3-2411WIN is a 3-watt isolated DC/DC converter module featuring an ultra-wide 4:1 input range of 9V to 36V. It provides a regulated 5V DC output at up to 600mA, housed in a compact DIP-24 package for through-hole mounting. This module offers 1500VDC isolation and short-circuit protection, making it a reliable choice for providing clean power to logic circuits in varied environments.

Why Choose This Part

The wide 4:1 input window simplifies inventory by covering both 12V and 24V nominal systems with a single part. Its 79% efficiency and 1500VDC isolation rating provide a robust thermal and electrical safety margin in a standard DIP-24 footprint.

Applications

Industrial Control Systems
Provides isolated 5V power to logic-level controllers and sensors from standard 24V industrial rails.
Mixed-Signal Isolation
Separates digital noise from sensitive analog components by providing an isolated power rail.
Telecommunications Equipment
Utilizes the 4:1 input range to handle fluctuating battery or bus voltages in networking hardware.
Distributed Power Architectures
Acts as a local point-of-load regulator for decentralized power systems in commercial applications.

Key Specifications

Type Isolated Module
Features SCP
Efficiency 79%
Applications ITE (Commercial)
Mounting Type Through Hole
Power (Watts) 3 W
Package / Case 23-DIP Module, 7 Leads
Approval Agency CB, cCSAus
Size / Dimension 1.25" L x 0.80" W x 0.40" H (31.8mm x 20.3mm x 10.2mm)
Number of Outputs 1
Voltage - Output 1 5V
Voltage - Isolation 3 kV
Operating Temperature -40degC ~ 85degC (With Derating)
Voltage - Input (Max) 36V
Voltage - Input (Min) 9V
Current - Output (Max) 600mA

Getting Started

Ensure a minimum 1.0 microfarad ceramic capacitor is placed near the input pins if the source impedance is high. Follow the standard DIP-24 pinout for PCB layout, ensuring adequate copper area around the pins for heat dissipation at the full 600mA load.

TEN 3-2411 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Efficiency Voltage - Isolation Voltage - Input (Min) Stock
TEN 3-2411WIN (this part) 79% 3 kV 9V 625
TEN 3-2411 81% 1.5 kV 18V 338

Categories

Power Management > DC-DC Converters