EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 04hrs 18min 20sec
Learn More →
TG2016SMN 26.0000M-ECGNNM3

TG2016SMN 26.0000M-ECGNNM3

EPSON
26 MHz TCXO Clipped Sine Wave Oscillator 1.8V 4-SMD, No Lead
Active3,466 in stock

Overview

The TG2016SMN is a high-precision Temperature Compensated Crystal Oscillator (TCXO) that provides a stable 26 MHz reference frequency in a compact 2.00mm x 1.60mm surface-mount package. Operating at a low 1.8V supply, it delivers a clipped sine wave output with an exceptionally tight frequency stability of +/-0.5 ppm over an industrial temperature range of -40 to +85 degrees Celsius.

Why Choose This Part

This TCXO offers a superior frequency stability of +/-500ppb, which is significantly more precise than standard crystal oscillators. Its ultra-small 2016 footprint and low 0.73mm profile save critical PCB real estate in dense mobile designs, while the 1.8V operation and low 2.0mA current consumption extend battery life.

Applications

GNSS and GPS Receivers
Provides the high-stability clock reference required for rapid satellite signal acquisition and precise positioning.
Wireless Communication Modules
Serves as the local oscillator for LTE, Wi-Fi, and Bluetooth RF front-ends that require low frequency drift.
IoT Connectivity
Ideal for battery-powered LPWAN devices where low power consumption and reliable timing are critical for network synchronization.
Portable Navigation Devices
Small footprint and low-profile design allow for integration into thin wearable or handheld navigation hardware.

Key Specifications

Type TCXO
Output Clipped Sine Wave
Frequency 26 MHz
Mounting Type Surface Mount
Base Resonator Crystal
Package / Case 4-SMD, No Lead
Size / Dimension 0.079" L x 0.063" W (2.00mm x 1.60mm)
Voltage - Supply 1.8V
Frequency Stability +/-500ppb
Height - Seated (Max) 0.029" (0.73mm)
Operating Temperature -40degC ~ 85degC
Current - Supply (Max) 1.5mA
Supplier Device Package 4-SMD (2x1.6)

Getting Started

When integrating this TCXO, ensure a 0.01 microfarad bypass capacitor is placed as close as possible to the Vcc pin to minimize noise. The clipped sine wave output is designed to drive a 10 kilohm / 10 picofarad load; if driving a CMOS input, an AC-coupling capacitor or a buffer may be required depending on the receiver specifications.