EmbeddedRelated.com
    Parts    THS3001IDGN
THS3001IDGN

TITHS3001IDGN

Texas Instruments
Current Feedback Amplifier 1 Circuit 8-HVSSOP
5,561 in stock
Datasheet Digi-Key Compare Prices

Overview

The THS3001IDGN is a high-speed current feedback amplifier engineered for high-performance signal chains requiring extreme slew rates and wide bandwidth. Operating on a supply range of 4.5V to 16V, it delivers a massive 6500V/us slew rate and a 420 MHz -3dB bandwidth, making it ideal for driving low-impedance loads in demanding environments.

Why Choose This Part

This amplifier offers a superior combination of 6500V/us slew rate and low 6.6mA quiescent current, allowing for high-frequency performance without excessive power consumption. The HVSSOP package features an exposed thermal pad, which is critical for maintaining stability while delivering up to 100mA of output current.

Applications

High-Resolution Video Drivers
The high slew rate and 420 MHz bandwidth ensure minimal signal distortion in high-definition video distribution and routing systems.
ADC Input Buffering
Provides low-noise (1.6 nV/rtHz) and high-speed settling for driving high-speed analog-to-digital converters in communications equipment.
Communication Test Equipment
Ideal for signal conditioning in test and measurement platforms requiring high-frequency signal fidelity across a broad operating temperature range.
Photodiode Preamplifiers
Utilized in high-speed optical imaging and sensing applications where wide bandwidth is necessary to capture fast pulse transitions.

Key Specifications

Slew Rate 6500V/us
Mounting Type Surface Mount
-3db Bandwidth 420 MHz
Amplifier Type Current Feedback
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Current - Supply 6.6mA
Number of Circuits 1
Current - Input Bias 2 uA
Operating Temperature -40degC ~ 85degC
Gain Bandwidth Product 1.75 GHz
Voltage - Input Offset 1 mV
Supplier Device Package 8-HVSSOP
Current - Output / Channel 120 mA
Voltage - Supply Span (Max) 33 V
Voltage - Supply Span (Min) 9 V

Getting Started

When designing with the THS3001, prioritize a low-impedance ground plane and place 0.1uF bypass capacitors as close to the power pins as possible to maintain stability at 420 MHz. Use the THS3001EVM evaluation module to verify performance and tune the feedback resistor, which is critical for optimizing the frequency response of current feedback architectures.

THS3001 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Stock
THS3001IDGN (this part) TSSOP-8 5,561
THS3001ID SOIC-8 6,061