EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
19days 02hrs 20min 21sec
Learn More →
TJA1042TK/3/1J

TJA1042TK/3/1J

NXP USA Inc.
1/1 Transceiver Half CANbus 8-HVSON (3x3)
Active22,514 in stock

Overview

The TJA1042TK/3/1J is a high-speed CAN transceiver that provides the interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. This specific variant features a Vio pin for direct interfacing with 3V to 5V microcontrollers and supports data rates up to 5Mbps for CAN FD applications.

Why Choose This Part

This transceiver offers exceptional ESD protection (plus or minus 8 kV) and high voltage robustness (plus or minus 58 V) on the bus pins, ensuring reliability in harsh electrical environments. It features an ultra-low power Standby mode with a typical current consumption of 5uA and includes bus wake-up capability to reduce overall system energy use.

Applications

Automotive Body Control
Ideal for 12V and 24V vehicle systems requiring high-speed networking for door modules, lighting, and climate control.
Industrial Automation
Used in rugged industrial environments to provide reliable communication between PLCs and motor controllers over long cable runs.
Battery Management Systems (BMS)
Facilitates communication between battery monitoring ICs and the main controller in electric vehicle and stationary storage applications.

Key Specifications

Type Transceiver
Duplex Half
Protocol CANbus
Data Rate 5Mbps
Mounting Type Surface Mount
Package / Case 8-VDFN Exposed Pad
Voltage - Supply 4.5V ~ 5.5V
Receiver Hysteresis 120 mV
Operating Temperature -40degC ~ 150degC
Supplier Device Package 8-HVSON (3x3)
Number of Drivers/Receivers 1/1

Getting Started

To evaluate this part, use a CAN FD controller such as an S32K or LPC microcontroller with a dedicated CAN peripheral. Ensure the bus is properly terminated with 120-ohm resistors at both ends and provide a stable 4.5V to 5.5V supply to the Vcc pin while matching the Vio pin to your microcontroller's I/O voltage.

Also Consider

TCAN1042V-Q1 TITexas Instruments - An AEC-Q100 qualified alternative with similar 5Mbps CAN FD support and Vio level shifting.
MCP2562FD MCHPMicrochip Technology - Offers similar CAN FD performance and a dedicated Vio pin in a small DFN package.
ISO1042 TITexas Instruments - Consider this if your application requires galvanic isolation between the CAN controller and the physical bus.