EmbeddedRelated.com
    Parts   Analog ICs  Op-Amps    TL072 Op-Amps Family    TL072    TL072CDR
TL072CDR

TITL072CDR

Texas Instruments
J-FET Amplifier 2 Circuit 8-SOIC
Active54,873 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The TL072CDR is a dual JFET-input operational amplifier designed for high-speed applications requiring low input bias and offset currents. It features a high slew rate of 13V/us or up to 20V/us depending on conditions, and a 5.25 MHz gain bandwidth product. This device is widely used in high-impedance signal conditioning stages where minimal loading of the source is critical.

Why Choose This Part

The JFET input stage provides exceptionally low input bias current and input offset current, making it superior to bipolar amplifiers for high-impedance sources. It offers a wide supply voltage range from 10V to 30V total span and maintains stable performance with a typical supply current of 1.4mA per channel.

Applications

High-Impedance Sensor Interfaces
Utilizing the 65 pA input bias current to interface with piezo sensors and pH probes without significant signal loading.
Active Filter Design
Implementation of high-order Sallen-Key or State-Variable filters where the high slew rate ensures low distortion at higher frequencies.
Audio Preamplification
Used in professional audio equipment for clean signal amplification due to its low noise characteristics and high-speed performance.
Sample-and-Hold Circuits
The low input bias current minimizes voltage droop in capacitor-based hold circuits.

Key Specifications

Slew Rate 13V/us
Mounting Type Surface Mount
Amplifier Type J-FET
Package / Case 8-SOIC (0.154", 3.90mm Width)
Current - Supply 1.4mA (x2 Channels)
Number of Circuits 2
Current - Input Bias 65 pA
Operating Temperature 0degC ~ 70degC (TA)
Gain Bandwidth Product 5.25 MHz
Voltage - Input Offset 3 mV
Supplier Device Package 8-SOIC
Voltage - Supply Span (Max) 30 V
Voltage - Supply Span (Min) 10 V

Getting Started

For rapid prototyping, mount the 8-SOIC package onto a DIP adapter for use with breadboards. Ensure that power supplies are decoupled with 0.1uF ceramic capacitors placed as close to the VCC+ and VCC- pins as possible to prevent oscillation during high-speed transitions.

Part of TL072 Op-Amps family » TL072

TL072 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Slew Rate Current - Supply Current - Input Bias Temp Range Voltage - Input Offset Stock
TL072CDR (this part) SOIC-8 13V 1.4mA 65 pA 0degC ~ 70degC (TA) 3 mV 54,873
TL072IDR SOIC-8 13V 1.4mA 65 pA -40degC ~ 85degC (.. 3 mV 93,999
TL072CP TSSOP-8 13V 1.4mA 65 pA 0degC ~ 70degC (TA) 3 mV 5,219
TL072CPWR TSSOP-8 13V 1.4mA 65 pA 0degC ~ 70degC (TA) 3 mV 9,834
TL072HIDR SOIC-8 20V 1.4mA 1 pA -40degC ~ 125degC .. 1 mV 51,733
TL072ACDR SOIC-8 13V 1.4mA 65 pA 0degC ~ 70degC (TA) 3 mV 1,590
Also available as: TL072IP, TL072QDREP

Also Consider

TL072H TITexas Instruments - Offers improved offset voltage and higher temperature range for more demanding industrial environments.

Categories

Analog ICs > Op-Amps